answersLogoWhite

0

Gray in white plaster is usually trapped moisture and will often go away as the plaster hydrates. If it does not then they can be removed by draining the pool, acid washing the area, heat it carefully with a torch to draw the water out and then polish the plaster smooth. This should absolutely be done by a professional experienced in this type of remedy. A ZERO alkalinity treatment may also work with the water still in the pool. Again, pros only. Trowel burns can also cause gray in pools but you need someone familiar with this to properly diagnose the cause. If the plasterer is an NPC (National Plaster Council) member a tech advisor may come to look at the pool and diagnose it properly.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Is it normal for a newly resurfaced gunite pool to have streaks made by the workers' trowel marks?

No its not


If part of a newly sprayed gunite pool shell is not identical to the opposite side can that portion be built up more to match or be redone?

If it is newly sprayed it should not be a problem.


Will standing water in newly shot gunite pool shell cause damage?

No as long as the cement had gone of originally this is not a problem.


Should there be cracks in a newly plastered wall?

As the new plaster dries there may be some slight crazing in stressed areas at corners and the like, but there should be no substantial cracks.


Why would a newly plastered pool begin to discolor?

Poor chemical balance. Neglect. Contaminated fill water. Iron in the fill water. etc etc etc. k


Can you use a dehumidifier to dry out newly plastered walls?

you should allow one week per 1mm of affixed plaster....you can cheat by painting over the plaster surface with a breathable paint BUT you will probably suffer from condensation until the plaster has dried thoroughly. Merry Christmas


Can using the pool heater on a newly plastered pool have any adverse affects?

If the installer says don't run it, I wouldn't. If the plaster falls off for any reason, he can say it was because you didn't follow his instructions and voided the warranty.


What causes a newly installed roof ridge vent to warp when the sun heats it up?

jesus


What if your brake lines rub on the tires of your newly lifted jeep wrangler?

Don't drive it until you correct the problem.


What are the causes of in-proportional growth in sales?

There can be a few causes of in-proportional sales growth. This includes items coming into season, like pools in the summer, and items that are newly released or improved in their formulas.


What causes a newly made protein to be released by the mRNA?

A newly made protein is released by the mRNA during the process of translation when a stop codon is encountered, signaling the end of the protein coding sequence. This triggers the ribosome to release the completed protein chain into the cell.


What causes a coke explotion?

Pop a mento in a newly opened coke bottle and screw the lid back on, hen give it a really hard shake!= BOOM!