The float valve in a toilet typically consists of a floating mechanism attached to a rod, which is connected to a fill valve. The float itself can be a ball or a cylindrical shape, usually made of plastic or metal, and it rises and falls with the water level in the tank. When the tank fills, the float rises, eventually shutting off the water flow when it reaches a certain level. The assembly is usually located on the side or back of the toilet tank.
To locate and operate the toilet water shut off valve in your bathroom, look for a small valve usually located behind or near the toilet. Turn the valve clockwise to shut off the water supply to the toilet. To turn the water back on, simply turn the valve counterclockwise.
like a toilet
To locate and operate the toilet shutoff valve in case of an emergency, first, look behind the toilet near the wall for a small valve. Turn the valve clockwise to shut off the water supply to the toilet. This will stop the flow of water and prevent any further damage.
To turn off the water to a toilet without a valve, you can shut off the main water supply to your house. Look for the main shut-off valve, usually located near the water meter or where the main water line enters your home. Turn the valve clockwise to shut off the water supply to the toilet.
If you open the lid on your toilet you should see the ballcock. It is normally on the left side and has the float, that looks like a ball, attached to it. It is used to fill the water in the bowl and set the height of the water.
The dual flush toilet was invented by Australian Bruce Thompson of the Caroma plastics company in 1980. But didn't look like the traditional toilet so they redesigned it to look like a classic toilet.
samething
Which part, the tank or the bowl? If it's the tank, you have a problem with a restriction between the tank and the bowl. If it's the bowl, you have an obstruction in either the neck of the toilet or the drain pipe below the toilet.
it looks like a toilet
they look like small circles which float around
Flapper valve is bad. Costs about $2.00 for a new one. has a chain on it, pull old one, install new one, adjust pull chain to right length. If the toilet bowl level gets low you have an internal crack in the bowl and need to replace the toilet. Or get a shorter dog!
It looks like a toilet but one that is used more in camps.