Since most types of chlorine are very high in PH it may effect the over all PH of the water if it is not buffered.
Lots o filtering.
Depends on the type of chlorine you are using as each type of chlorine product has it's own pH level. i.e Liquid chlorine (sodium hypochlorite) has a natural pH of about 14. Trichlo products have a pH of about 3 Dichlor products have a pH of about 6.8 Gas Chlorine has a pH of <1 So based on the above lets say you are using liquid chlorine in a concrete pool, the pH will tend to be high (alkaline) due to the high pH of the chlorine product coupled with the fact the pool is concrete.
measure the pH level
The pH level in your pool may be consistently high due to factors such as high alkalinity, high calcium hardness, or the use of certain pool chemicals. It's important to regularly test and balance the pH levels in your pool to maintain water quality and prevent issues like scale formation and inefficient chlorine disinfection. Consider adjusting your pool water's alkalinity, using pH decreasers, or consulting a professional if the issue persists.
The pH level of 13 has a high alkalinity, the number being one away from the most alkaline number on the pH scale of 14. Some substances that have the pH level of 13 are: *Chlorine Bleach *Oven Cleaner *Tub and Tile Cleaner So basically, many common household cleaners have a pH level of 13.
Adjusting the chlorine content will almost certainly affect the pH, so it would be simpler to get the chlorine level correct first and then titrate to the proper pH.
To shock the pool, about a gallon. To just chlorinate, a quarter gallon, then measure the chlorine level with an OTO test kit. Keep the chlorine level between 1-3 PPM, and the pH at 7.2. You can adjust pH with plain old baking soda if the pH is too low, or add a little muriatic acid if the pH is too high.
pH is the comfort level of the water. The pH level of water ranges from 0-14. 7 being neutral. Too high pH and the chlorine becomes less active, too low pH and the water is acidic. Keep your pH between 7.6-7.8 and you'll be fine.Good luckRobert
To raise the pH, you can add pH increaser like soda ash or sodium carbonate. To lower the chlorine level, you can dilute the pool water by adding fresh water or use a chlorine reducer product. Make sure to retest the levels after balancing to ensure they are within the optimal range.
The pH level of the blood drops when exercising.
High level of anything is not good for you. High pH level can be damaging for one health. I would advise you lower your pH until it reaches the right level.
Shocking a pool primarily serves to eliminate contaminants and restore water clarity rather than directly balancing pH and chlorine levels. When you add shock, it typically raises the chlorine level temporarily, which can affect the pH. After shocking, it's essential to test and adjust both pH and chlorine levels to maintain optimal water chemistry for safe swimming.