answersLogoWhite

0

Chlorine should be kept between 1-3 ppm at all times. Below that and the water is not sufficeintly sanitized. Above that and you should not enter the pool. A test kit will tell you the ppm, adust as needed daily. Pool & Spa

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Can you use bleach to keep the water clear in your pool?

Yes bleach does contain the same active ingredient as liquid chlorine commonly used in swimming pools but it is at a much lower concentration. Generaly for swimming pools we use either 10% or 12.5% Sodium Hypochlorite.


What concentration of bleach does it take to kill mold?

A concentration of 1:10 bleach to water is typically recommended to kill mold. This translates to about 1 cup of bleach per gallon of water. It is important to wear protective gear and ensure good ventilation when using bleach for mold remediation.


If a person is allergic to bleach can they swim in a pool?

If a person is allergic to bleach they should not swim in a pool. Most pools contain chlorine, which is a form of bleach used to disinfect and sanitize water.


How much bleach to add to a 1 part bleach 10 part water concentration if you have 1 gallon of water?

0.1 gallon of bleach, or 12.8 ounces (just over 1.5 cups)


Can you use bleach in biguanide pools?

NO! bleach is sodium hypochlorite...." Liquid chlorine"


Which solution has the greatest concentration of H plus ions vinegar 2.5 milk 6.5 water 7.0 bleach 12.5?

Bleach with a pH of 12.5 has the greatest concentration of H+ ions because the pH scale is logarithmic, meaning a higher pH value corresponds to a lower concentration of H+ ions. Therefore, bleach, with the highest pH value, has the lowest concentration of H+ ions.


What is the concentration of calcium hypochlorite in bleach?

The concentration of calcium hypochlorite in bleach varies depending on the brand and type of bleach. However, most household bleach solutions contain around 5-6% sodium hypochlorite, which is the active ingredient derived from calcium hypochlorite.


If Janola is bleach and water what is the percentage of bleach to water?

The percentage of bleach in Janola can vary depending on the product's formulation. However, a common concentration is around 3-5% bleach (sodium hypochlorite) in water. It's important to check the label for the specific percentage in the product you are using.


Where you can find chlorine from your surrounding?

Chlorine can be found in swimming pools and cleaning products such as bleach. It can also be found in tap water if it has been treated with chlorine for disinfection purposes.


What has chlorine in it?

bleach,weed killer and waste water treatment


When I put bleach and water in my tub and left it over night . My brother drained the water and took a bath but didn't rinse the tub will he be okay?

No problem. Many swimming pools have more bleach in their water than the tiny bit your brother might have had.


How many drops of bleach to purify a gallon of water?

To purify a gallon of water, you can use 8 drops of bleach if the bleach concentration is 8.25%. Mix well and let it sit for at least 30 minutes before consumption.