0
To determine the size of the halogen bulb for a 22-volt AC transformer with a 120 VA rating, you first calculate the maximum wattage output of the transformer, which is 120 watts (since VA is equivalent to watts for resistive loads). Given the voltage of 22 volts, you can find the appropriate current by using the formula: Power (W) = Voltage (V) × Current (A). Therefore, you can use a halogen bulb rated for 22 volts and up to 120 watts.
What else can I help you with?
What is your amp draw of a mr16 light with a transformer?
The amp draw of a MR16 light with a transformer can vary depending on the wattage of the light bulb and the efficiency of the transformer. Typically, a 50 watt MR16 halogen bulb with a transformer can draw around 0.42 amps. It is important to check the specifications of your specific MR16 light and transformer to determine the exact amp draw.
Is a transformer needed for G9 40 watt bulb for a ceiling chandelier?
No, G9 bulbs are typically low voltage halogen or LED bulbs that do not require a transformer. However, it's important to check the specifications of the specific bulb and chandelier to ensure compatibility.
What type of gas is in a tungsten-halogen light bulb?
Halogen gas is in a Tungsten-Halogen Light Bulb.
How do you know if your halogen transformer is able to be used with a dimmer switch?
Halogen lamps should not be dimmed. At lower voltages the halide is not hot enough and will condense on the glass bulb, darkening it. You will be replacing bulbs all the time.
Can you mix incandescent bulb with halogen bulb in same light fitting?
Yes, the halogen bulb would provide about 30% more brightness (lumens) for the same electric power rating. So 70 watt halogen is about equal to 90-100 watt incandescent.
Can you use a 50 watt halogen bulb for a 100 watt halogen bulb?
Yes. It just won't be as bright.
How do you change halogen bulb in ls-984 torch reading combo lamp?
It is a double ended halogen bulb and I do not know how to get to it to release it from the lamp.
Can you use a 120 volt halogen bulb in place of a 110 volt halogen bulb?
Yes, the two voltages are in the same range category.
What is the average lifespan of a 60 watt halogen bulb?
The average lifespan of a 60 watt halogen bulb is around 2,000 to 4,000 hours.
What is the incandescent equivalent of a 40 Watt halogen bulb?
A halogen bulb IS ITSELF a type of incandescent illumination source. A 40 Watt traditional incandescent bulb usually emits about 400 to 500 lumens while a halogen may emit close to twice that. So a 25 W halogen might give out as much light as ah older style 40 W bulb.
How can calculate amps for 12V 50W halogen lamp in 230V input?
It would be pretty much undefined, since the filament of the halogen bulb would fail immediately then there would be an open circuit with no current draw. <<>> The formula for current is Amps = Watts/Volts. The lamp itself would draw 4.16 amps. Since the voltage of the lamp is 12 volts there is a internal transformer involved in the fixture itself. It doesn't matter what the input (primary) voltage to the transformer is, so long as it meets the manufacturer's specification as to the proper voltage to operate the fixture.
What is the bulb type on a 2001 lanos?
The 2001 Daewoo Lanos uses H4 halogen bulbs for its headlights.
