0
What size wrench do you need to take a fan off a 2001 blazer and which way do you turn it?
Try them until one fits, and then turn left. Turn left loosely then to the right tightly.
The current answer is about the best advice you can receive unless you happen to find another 2001 Blazer owner or mechanic who knows the actual size.
Here is a rewording of the current answer.
Take a look at the bolt that holds the fan wheel into place and try to get a general idea of the bolt's head size. Then, grab the wrenches that look like they will fit and start experimenting to find the right sized wrench. What you are looking for is an easy fit onto the bolt without too much play in the wrench. Once you have found the right size wrench you may proceed to loosen the wheel by turning the wrench counter-clockwise. Remember what wrench you used and your job will be a little bit easier when you put it back on.
Hope I helped
Zilduli
Answer: Well, if you don't know which way to turn the wrench, or what size, find a friend or someone who can do the job for you, also to check why you need to remove the " clutch Fan " also check with this person or the dealer if you need the computer re=programmed. When you watch someone, you learn also. Hope this is good advise. Good luck.
What else can I help you with?
What size wrench do you need to change the front brakes on a 2001 Dodge Durango?
What size wrench do you need to change the front brakes on a 2001 dodge durango?"
What size bolt is on the caliper of a 2001 Chevy blazer?
It takes a 3/8" allen wrench to r & r that caliper bolt.
What size wrench or tool do you need to take off a caliper on a 2001 Ford Taurus?
You need a 13mm box wrench.
What size tire are on a 2001 Chevy s10 blazer?
235x70x15 this tire size on my 2001 s10 blazer
What size wrench for pitman arm nut on 2001 blazer?
The pitman arm nut on a 2001 Chevy Blazer typically requires a 1-1/8-inch wrench. It's important to ensure that you use the correct size to avoid rounding off the nut. Always check the specific vehicle's service manual for confirmation, as variations may exist depending on the model or any modifications.
What is the wrench size to take off the frant brake pads of a 2001 Saturn LS?
You need a 12 mm wrench, not Allen key.
What size wrench do need to remove a oil drain plug from a 2001 chevy malibu?
15 mm
What is the wrench size for an oil drain plug on a 4.7 2001 dodge Dakota?
The wrench size is 14mm.
What size wrench is needed to remove the caliper bolts on the front brakes of 1979 Chevy blazer?
It should be a 3/8" Allen wrench.
Allen wrench size needed to remove caliper on a s10 Chevy blazer?
3/8"
What size wrench size for plugs for 2001 Tacoma?
5/8
What size Allen key do you need to remove the front brake pads on a 2001 clio?
You will need aÊ7mm Allen wrench key to remove the front brake pads on a 2001 Clio. The Allen wrench can be purchased at any auto parts store.
