There may be a small hole in the pipe causing this. The pipe may also be loose allowing air to get ?æin there.
The input process of a washing machine are dirty clothes, detergent, and water are put into the washing machine. The washer washes the clothes and the output process is clean clothes.
An automatic washing machine is an output device, as it takes in input in the form of water, detergent, and clothing, and produces the output of clean clothes.
Input: Dirty clothes, water, detergent. Output: Clean clothes.
It is both. It is where you set your machines cycle and where you can see what work is being done throughout the cycle.
The input force of a sewing machine is the torque from the motor.
If the input work is processed by a machine and no output work is produced, the machine is considered to have zero efficiency. This means that the machine is not effectively converting input work into useful output work.
the imput and the output of the washing machine is input:washes your clothes output:your clothes get clean
Yes, a machine can multiply input force by input distance to increase input energy. This concept is known as mechanical advantage, where the machine amplifies the input force to output more energy than what was initially supplied.
The mechanical advantage of a machine compares the input force applied to the machine with the output force produced by the machine. It is calculated as the ratio of the output force to the input force and indicates how much a machine amplifies or reduces the input force.
The input force is the force applied to a machine to make it work, while the output force is the force produced by the machine as a result of the input force. In simple terms, the input force is what you put into a machine, and the output force is what you get out of it.
Output(input), or O(i)
In a compound machine, the input force is applied to the first machine and then becomes the output force for the next machine in the sequence. The output force of the first machine becomes the input force for the next machine, and so on. Therefore, the input and output forces of the parts of a compound machine are related as they are transferred from one machine to the next within the system.