answersLogoWhite

0

yes, and the pH can go up significantly depending on what type of chlorine used for shocking. Liquid chlorine (sodium hypochlorite) will cause the PH to increase at a higher rate than that of granular chlorine (such as calcium hypochlorite)

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Can you go in a pool if the free chlorine is low?

Yes, but you should shock it so the water stays clear (do not go in after shocking until the chlorine is at a safe level 1-3ppm)


Ph is low and chlorine is high?

To raise the pH, you can add pH increaser like soda ash or sodium carbonate. To lower the chlorine level, you can dilute the pool water by adding fresh water or use a chlorine reducer product. Make sure to retest the levels after balancing to ensure they are within the optimal range.


How much shock do you use in a 1700 gallon pool?

It really depends on the size of your pool. A normal 25,000 gallon pool would require about 6.5-7lbs. of chlorine to bring it up 10ppm. Go to the link below for a chart on shocking.


Can you put too much shock in your pool?

Shocking should be done in order to kill the chloramines. It depends on your chlorine level. For residential pools it should be 1.5-2.5ppm. For commercial, chlorine should be 3.5-4.5ppm. If you have just shocked, don't go in the water. The chlorine is probably 10-12ppm and will cause itching and burning. Wait until the level drops to a safe level, as stated above.


Is it safe to go swimming in a pool when the ph is good but the chlorine isn't high enough yet?

It is safe. That just means that the chlorine is not actively killing bacteria. It would be unsafe if there was too much chlorine.


What minerals need to go into pool?

There are enough minerals in the water and the make-up water. You do not need to add more. Maintain water chemistry ~ chlorine, pH, alkalinity and filtration. Ken


What causes the pH of solution to increase?

Adding a base will make the pH go up (increasing of OH- ions concentration).


What causes pH of a solution to increase?

Adding a base will make the pH go up (increasing of OH- ions concentration).


Does a saltwater pool require the PH to be adjusted more than a non salt pool?

A salt water pool is still a chlorine pool, but a weaker form of chlorine if you will! Your PH is affected by the reaction of the "chlorine" with the contamination in the pool. Your salt generated chlorine is working harder to kill the bacteria that it can kill. Therefore there is more "demand" in your pool which will require a more consitant Ph adjustment to keep the chlorine active! The "kill rate" or time it takes to kill, of salt generated chlorine is nearly double that of chlorine. E-coli for instance can live in a chlorine pool for up to 96 hours. A salt pool, as much as 180 hours. YUCK! You should be aware that many common pool bacteria have grown immune to chlorine and salt generated chlorine! Chlorine or salt does not kill Cryptosporidium or Girardia! Science has moved well beyond chemical additon to swimming pools. Check the World Health Organizations- Healthy Pool Guidelines! Ultraviolet is the way to go! Jon La


What causes the pH of a solution of a solution to increase?

Adding a base will make the pH go up (increasing of OH- ions concentration).


What are home remedies to kill algae in ingroud pools?

Chlorine bleach kills algae. That's why chlorine is used in swimming pools. Be careful when using chorine bleach. It should not be mixed with other cleaners. Use it in a well ventilated area. It is very powerful and should be diluted.


When you add an acid to an alkali does it make the pH number go up?

No it goes down