You can check for parts at gunpartscorp.com, or most gunsmiths.
Yes, 380 or 9mm from a model 58 or 59 is the same pin...
Try e-gunparts.com
Try e-gunparts.com
Try e-gunparts.com
Check out this web site for your answer. http://bryco-jennings-jimenezarms.com/index.html If your question is, does Bryco model 38 or model 380 have a firing pin....then yes it does or when it was made.
Let a gunsmith do it.
Color is immaterial
If you don't have an owner's manual, go to a gunsmith
the spring is for being able to keep the lid open while playing the spring goes at the back right of the psx in the disc bay where the lids pin push's down
Open action remove pin remove slide,barrel,spring.
I just want to know how to brake the lorcin 380 down and clean it Here's how: Remove the magazine. Run the action to assure the firearm is empty. Take a pen, pencil or Popsicle stick (my tool of choice) and push in the part at the rear of the 380 surrounding the firing pin. You may need to run the action back while doing this to be able to lift the action from the frame. **** WARNING***** When the action comes away from the frame there are several parts and springs that **sometimes** come away from their proper positions. DO NOT attempt to do this in the field. Do this at a table on paper with a clean floor. Experience is speaking here!! Depressing this part releases the catch hook for the action. and the action will release from the frame. The firing pin catch has a long skinny spring under it. the magazine release spring resides under the handle guard on the right hand side (opposite the release lever). The firing pin spring goes in after the firing pin in the action that comes away from the frame. The firing pin goes in short end first. The main spring seats on the front of the frame over the short stop spring. All of that just in case you get a SPROING which does happen.
Trigger with trigger bar, trigger spring, connector, trigger housing with ejector, locking block, slide stop, magazine catch, magazine catch spring, slide lock, slide lock spring, locking block pin, trigger pin, trigger housing pin, Frame, Magazine tube, magazine floor plate, magazine spring, magazine insert, magazine follower, front sight, extractor, rear sight, firing pin channel liner, extractor depressor plunger, extractor depressor plunger spring, Spring loaded bearing, spring cups (2), Firing pin spring, firing pin, firing pin spacer sleeve, slide cover plate, firing pin safety spring, firing pin safety, barrel, recoil spring assembly, 36 parts unless I missed one.