Weed Eater, Poulan Pro, Ariens, and Craftsman Yard Tractors (YT Series) are all made by Husqvarna (aka American Yard Products).
To put on the belt on a Husqvarna YTH 180 with a 46-inch deck, first, ensure the mower is turned off and the key is removed. Raise the deck to its highest position and remove the deck from the mower by detaching the pins or brackets. Then, remove the old belt from the pulleys and replace it with the new belt, ensuring it follows the correct routing as indicated in the owner's manual. Finally, reattach the deck to the mower and lower it back to the desired cutting height.
16 inch
The recommended deck joist spacing for a 24-inch deck is typically 16 inches on center.
The Husqvarna 371 is a discontinued chainsaw model that had a 3.7 cubic inch (61 cc) engine with a power output of around 3.7 horsepower. It featured a chain pitch of 3/8 inch and had a weight of approximately 13 pounds without the cutting equipment.
poulan
some thing's probaly rubing on it. also check the clucth to see if it's working.
84 inch
42" deck = 71" belt48" deck = 73.8" belt44" SNOWBLOWER uses V-Belt 131"
A 5/4 deck board typically has a thickness of 1 inch and a width of 4 inches.
You will need to order a manual on the mower from the manufacturer (I assume Simplicity).
No thay will not. Car and truck wheels will not interchange.