0
I wouldn't recommend using a nail gun on plaster, it may shatter around the area you would be nailing. I would predrill a whole and use screws into the studs. I recommend using a concrete drill bit. If you plan on covering the entire wall with wood or something then you could get away with using a nail gun, but if you ever take that wood down the plaster wall will be ruined. You could always fill in the pre-drilled holes and paint over it if you ever wanted the plaster look again if you went with screws.
What else can I help you with?
Can you install hardie plank to brick wall exterior wall?
Yes , seal wall and nail it with a special gun and high psi special compressor
What is the best technique for using a nail gun to install baseboards?
The best technique for using a nail gun to install baseboards is to hold the gun at a slight angle, aim for the wall studs, and press the trigger firmly to drive the nail in securely. Be sure to space the nails evenly and avoid overdriving them to prevent damage to the baseboard.
When was the nail gun invented?
The nail gun was invented in the 1950's
What is the best technique for using a nail gun to install baseboards effectively and efficiently?
The best technique for using a nail gun to install baseboards effectively and efficiently is to hold the nail gun at a slight angle towards the baseboard, position it at the top edge of the baseboard, and then press the trigger to drive the nail into the wall. Make sure to space the nails evenly and use the appropriate length nails for the job.
When was nail gun invented?
The nail gun was invented in the early 1950's
Where can I buy a quality nail gun?
You can buy a quality nail gun online at this site (FreshDeals.com). For $31.01 you can purchase a fantastic Stanley nail gun from them.
What was used to design the nail gun?
The nail gun was invented by 3 WW2 vets, one of whom had been a machine gunner. They envisaged a tool that could do the same with nails.
What is a nail gun?
A nail gun is a pneumatic (air operated ) tool that is used to fire nails. They are very useful in a number of jobs. A large framing nail gun is invaluable in wood building construction and smaller angle nailers are used to install wood base board and door frames. Still smaller nail guns are used in some crafts and upholstery to fire nails from .5 to 1.8 inch.
What three tools used by carpenter?
A skilsaw, a mitre saw and a nail gun.
What are the steps for installing board and batten with plywood on a wall?
Measure and cut plywood to desired size for the boards. Attach plywood boards to the wall using a nail gun or screws. Measure and cut battens to fit between the boards. Attach battens over the seams of the plywood boards using a nail gun or screws. Fill any nail holes or gaps with wood filler. Sand the surface for a smooth finish. Prime and paint the board and batten wall as desired.
How can you hit a nail at a regulated pressure?
Nail gun.
What is the best nail gun for installing baseboards?
The best nail gun for installing baseboards is a finish nail gun. It is designed for precision and can easily drive nails into baseboards without damaging the wood.
