answersLogoWhite

0

no it does not, if anything it will help it.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How can I effectively use WD40 to fix a stubborn lock?

To effectively use WD40 to fix a stubborn lock, spray a small amount of WD40 into the keyhole and on the key itself. Insert the key into the lock and turn it back and forth a few times to distribute the lubricant. Repeat as needed until the lock operates smoothly.


Door lock on Toyota Echo will not open?

WD40.


How do you remove a difficult bolt?

WD40 and some elbow grease


How do you open a jammed lock on a door knob?

Spray in dry graphite and work the key until it loosens up the lock (unless you have already sprayed in a liquid lube like WD40 which will only gum it up more) If you've already made this mistake, try spraying a little brake cleaner in the keyhole to clean off the WD40, then try the graphite WD40 is not a lubricant, WD40 was invented as a WATER DISPERSANT henc WD, 40 represents the 40th attempt. WD40.


Why is your Honda accord gear is difficult in get to gear3?

WD40 on the steerinmg wheel


How do you fix a stiff door lock when WD40 fails on Ford Festiva?

Try graphite powder


How can you fix a stiff car door lock?

It depends on what the indicators are. Usually lubricating the lock with spray lubricant like Triflow or WD40 work. Never use graphite in locks as it tends to get clogged in the springs. If the lock is difficult to turn after this, then there might be a linkage problem which would require removing the door panel and finding the bind or other issue.


How do you get a stuck key out of your front door of your house?

spray with WD40 if that doesn't help replace the door lock


Could wd40 hurt or damage your cars brakes?

YES. Do not use any lubricants on your brakes. EVER.


How can I effectively use WD40 to lubricate and maintain the locks in my home?

To effectively use WD40 to lubricate and maintain locks in your home, follow these steps: Spray a small amount of WD40 directly into the keyhole or lock mechanism. Insert and remove the key several times to distribute the lubricant. Wipe away any excess WD40 with a clean cloth. Repeat this process every few months to keep your locks working smoothly.


How can I effectively use WD40 to lubricate a lock that is stuck or difficult to turn?

To effectively use WD-40 to lubricate a stuck lock, spray a small amount directly into the keyhole and on the key itself. Insert the key and turn it back and forth a few times to distribute the lubricant. Wipe away any excess WD-40 and try turning the key again. Repeat the process if needed until the lock turns smoothly.


How can i repair a gummy door lock?

Spray some WD40 in it,have a rag with you because it will run back out you don't want it on paint or any other material.