Basically by rebuilding the safe. Not practical to try this. Sorry
A combination lock box is very safe for protecting goods. However, it depends on the type of lock, the type of material that the box is made from in order to determine how safe it is.
1Enter your old passcode, followed by the "A" key and turn the handle to open your Brinks safe.2 Find the red memory button inside your safe. Press and release the button, and your keypad will beep twice and the yellow LED on the keypad with light up.3 Enter your new passcode on the keypad. Your passcode can be anywhere between three and eight numbers.4 Press the 'B" key after entering your new passcode. The keypad will beep twice and the yellow LED will again light up.5 Leave the safe door open and push the safe's handle into the lock position. Wait three seconds for the lock to engage. Keep the door open.6 Enter your new passcode followed by the "A" key and listen for the lock to click open. Once you hear the lock, turn the safe's handle to verify it will open. If it does not, return repeat the process from the beginning.
No, this microwave oven does not have a lock option on it. It would be safest to keep this up higher where small hands cannot reach.
If you don't know the manufacturer of your keypad, call the safe maker and find out. The electronic keypad (which is the most common point of failure) can be replaced easily at home. Find a replacement part on the internet (make sure it's compatible with your safe). You'll save hundreds. BTW upgrade to a Sergeant and Greenleaf keypad, they cost a bit more but are much more reliable than the no namers out there.
A keypad controlled Sentry safe is opened by entering the correct code into the keypad. It prevents those without the correct code from opening it.
Simply open the lock and change the open lock to your new code, E.g 1234, Then close the lock then 1234 will be the combonation That is how i change my locks anyway
Yes I do believe that there is a safe out there that does have a fingerprint lock and a combination lock. I have seen some at stores a short while back.
The twisty thing on a safe is called a dial or combination lock. It is used to input the correct combination of numbers or symbols to unlock the safe.
To open a Brinks Fire Safe, you need the combination for the combination lock or the key. If for whatever reason you lost the combination for the lock, you should call customer service at 1-800-223-8566.
There'll either be a key, a combination lock (tumbler or electronic), or a combination of both.
Contact the maker.
your screwed like me