0
Your JA22 is the same as Jennings j-22. On the back part of the slide, where you can see the firing pin when cocked, there is a peice of metal around the pin that is a clip holding the slide down to the frame. Remove the magazine, check to make sure it is not loaded, then use something to push the metal clip towards the front of the pistol. Lift on the back part of the slide while the clip is pushed in. Make sure to cup the back of the pistol with your hand or you will be looking for parts on the other side of the room.
What else can I help you with?
How do you disassemble a byrco 380 for cleaning?
Take it to a gunsmith and ask for help
How do you disassemble for cleaning IJ70-17A 380 auto?
Ask a gunsmith for help
How do you disassemble a Jimenez 380?
To disassemble a Jimenez .380, first ensure the firearm is unloaded. Pull back the slide and release the slide stop to remove the slide from the frame. Next, remove the recoil spring and barrel by pressing the spring down and sliding it out. Finally, you can take out the barrel by pulling it forward and out of the slide. Always refer to the manufacturer's manual for specific instructions and safety guidelines.
How do you breakdown a Smith and Wesson Model 61-3?
There is no need to disassemble for routine cleaning.
Disassemble for cleaning 45 cal officers special?
Best to find a gunsmith and ask for help
How do you disassemble a model 38-2 smith and Wesson?
Not recommended for normal cleaning. Seek the services of a gunsmith.
How do you disassemble a smith Wesson model 36 pistol?
Best left to a trained gunsmith. For normal cleaning, no disassembly is needed.
How do you disassemble a s and w mod 422 for cleaning?
You can download or request a manual via mail from the S&W web site
What happens if I use my lawn mower choke when it's hot?
If you have to run it with the choke after it has warmed up, you need to disassemble the carb for cleaning.
What is the plural for Jimenez?
Jimenez'
How do you disassemble a ruger p 89 for cleaning?
Ruger will send you a manual for free if you go to their website. Alternatively, go to a gunsmith and ask for help.
Is the can opener easy to disassemble for cleaning or is it one solid unit?
The Oster 3151 can opener is a soild unit and should not be taken apart to clean.
