answersLogoWhite

0

<<<<EXTREME CAUTION THIS IS A DEADLY INSTRUMENT >>>>>>

While I have seen some demonstrations of an SA Micro compact 1911 disassembled without the use of the "take down tool", I have yet to be able to successfully disassemble without the "take down tool". I am still trying to find out if this is possible.

Here is the only way I've done it so far.

Remove magazine

Unload the gun.

Unload it again.

Point at safe wall/floor and dry fire.

Make sure its still unloaded.

Slide back (so that the hammer is cocked fully).

Lock the slide in place with slide lock.

Insert take down tool (basically a plastic or brass semi cylinder), snaps onto guide rod. BE CAREFUL or it will snap your fingers (if slide is released).

Let slide down (mainly cause you'll have to grip a little differently, and this will "lock" the take down tool in place)

Slide back part way until the linkage pin's flang lines up with the divit on slide (this is the small divit, not the big divit. Big is slide lock, small is the gap to remove the linkage pin). There should be much less pressure on the slide because the spring is partially disengaged (via take down tool).

Remove link pin.

Slide the slide forward.

Now you have two pieces, frame/hammer/extractor/trigger and slide/barrel/spring assembly.

Don't further disassemble frame parts unless you know what you are doing, totally unnecessary for cleaning.

Now dealing with only the slide/barrel/spring half of the gun:

Remove recoil spring assembly (only possible because take down tool prevents it from coming back) ((be careful the take down tool doesn't pop-off, it'll pinch you))

Drop linkage down to flat on barrel.

Pull barrel out of the front of the slide.

Its stripped now.

Perform in reverse to reassembly. Careful removing take down tool. Do so with the slide locked back. Again being very careful removing take down tool, so as to avoid pinching. (plenty of blood blister to attest to pinching)

Bukkiah

<<<<EXTREME CAUTION THIS IS A DEADLY INSTRUMENT >>>>>>

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Why fringing field of micro strip antenna is bended at the edges of this antenna?

Rephrase the question, What antenna?


How do you field strip a Springfield 1903 rifle?

Get the Gun Digest Assembly/Disassembly manual for military rifles, available on Amazon.


How do you field strip a Springfield Model 1903 rifle?

Get the Gun Digest Assembly/Disassembly manual for military rifles, available on Amazon.


What is the disadvantage of strip line over micro strip line?

more radiate.


What are the different types of strip lines with schematic disgrams?

Micro strip lines,Parallel strip lines,Coplanar strip lines,Shilded strip lines.


How do you field strip a Colt 45?

go to: Forum.m1911.org they show you how to strip a 45...........................


Can you field strip your scar l by echo 1?

Yes but you may strip a piston.


How can you field strip an ak47?

Get Raf Hussan to do it as he is a expert in this field as his cousin is Saddam Hussein


How do you field strip a 38 colt detective special?

One does not field-strip a Colt detective special. Any repairs or adjustments should be left to a qualified gunsmith.


How can livestock damage soil?

For starters, animals compact soil, de-aerating it. This couples with the fact that they can strip land of vegetation.Heavy livestock such as cattle compact soil structure and destroy vegetation on parts of the field where they tread most often. The destruction is called "poaching" and is harmful because restoration of the vegetation does not always occur spontaneously once the grazing animals withdrawn.


How do you field strip a 1911?

Best to ask a gunsmith for assistance


Why micro strip line is called open strip line in microwave engineering?

It consists of dielctric substrate with a strip conductor on one side and complete conducting layer on the other. It is basically an open structure and requires high dielectric constant substrate to confine the fields near the strip conductor