0
What else can I help you with?
How do you take apart a Remington 700 bolt handle off?
The Remington model 700 bolt handle is part of the bolt body and this is a one piece forging.The only way to remove the bolt handle is to cut it off at the bolt body.
How do I get my Remington woodsmaster 742 30-06 to cycle correctly?
742 30.06 bolt slipped forward while cleaning.=, took patch with it. bolt loked in place about 3/4 way forward. How do i unlock the bolt?
How do you take apart a 700 bolt handle off?
The Remington model 700 bolt handle is part of the bolt body and this is a one piece forging.The only way to remove the bolt handle is to cut it off at the bolt body.
What is a Remington woodsmaster 742 308 worth?
depending on condition of the wood and the finish on the steel, as well as the rifling in the barrel and the action of the bolt... your price could range between $250-$450
How do you disassemble bolt from 742 woodsmaster?
It's probably best to ask a expert.
How do you install the bolt in a 5MM Remington mag rifle?
To install the bolt in a 5mm Remington rifle, first ensure the rifle is unloaded and pointed in a safe direction. Pull the bolt handle back to its rearward position, then align the bolt with the receiver and slide it into place. Once fully inserted, push the bolt handle down until it locks into the closed position. Finally, check the action to ensure it operates smoothly.
Are there any recalls on 1980 Remington Woodsmaster 742?
There have never been any recalls on the Remington Model 742 that I'm aware of. The Remington 742 is now an obsolete model and was replaced with the Remington Model 7400. The bolt received an upgraded design along with the magazine catch/release. At one time Remington was offering a Model 7400 as a replacement for the Model 742, if you sent them your Model 742 along with $350.00. Is there a problem with the 742 that you have?
How do you remove the bolt from a Remington mod 660?
To remove the bolt from a Remington Model 660, first ensure the rifle is unloaded and pointed in a safe direction. Pull the bolt handle fully to the rear, then locate the bolt release lever on the left side of the receiver. Press down on the lever while simultaneously pulling the bolt out of the receiver. Once released, the bolt should slide out easily.
How do you dissassemble a 740 Remington woodsman rifle barrel?
Once you have the forearm removed you need a special spanner wrench to remove the tube/nut below the barrel. The bolt handle pin is then drifted out of the bolt and then the bolt handle can be removed from the bolt body. The barrel will now come out the front end of the receiver.
Install the bolt Remington model 512?
Please tell me how to install the bolt in a Remington Model 512
How does one remove the bolt from the breech of a Remington model 740 Woodmaster?
Removing the bolt handle is a bit involved. If you slide the ejection port dust cover back and forth slightly until the cut-out on the top of the dust cover is over the bolt handle top you will see the end of a pin. This pin holds the bolt handle in place in the bolt. Unless you have the ability to completely take-down this rifle and then re-assemble it to working order, and have the tools to do so, it is NOT recommended you remove the bolt handle retaining pin.
How to install the bolt on a Remington model 700?
To install the bolt on a Remington Model 700, first ensure the rifle is unloaded and the safety is engaged. Align the bolt with the receiver and insert it at an angle, ensuring the bolt sleeve engages properly with the receiver's locking lugs. Once positioned, rotate the bolt handle down until it locks into place. Finally, check the action to confirm it cycles smoothly and the safety functions correctly.
