turn the rod under the barrel about 1/4 turn then pull it out slide 15 rounds down the tube then reinstall the rod
It would help if you stated the model. Sears sold several different BB guns.
I'll take it for free :)
To load a Sears Roebuck model number 126 10294, first ensure the machine is powered off and unplugged. Open the loading compartment by lifting the lid or opening the door, depending on the specific design. Place your items evenly in the drum, avoiding overloading, and then close the lid or door securely. Finally, plug the machine back in and select your desired settings before starting the cycle.
To load a Sears and Roebuck BB gun model 79919052, first, ensure the gun is pointed in a safe direction and is on a flat surface. Open the loading port, typically located near the barrel, and insert BBs into the chamber, making sure they are seated properly. Close the loading port securely. Finally, cock the gun if required, and you're ready to shoot. Always follow proper safety precautions when handling any firearm.
you probably just stop and load.
To load a Sears Ted Williams 3T .22 rifle, first ensure the firearm is pointed in a safe direction and the safety is engaged. Open the bolt by pulling it back and then insert a magazine into the magazine well until it clicks into place. Next, pull the bolt fully back and release it to chamber a round. Finally, verify that the safety is off before taking aim and firing. Always remember to follow proper firearm safety practices.
Priceless the gun was passed down to me by my father. squirrels do not have a chance with a target load. they were chewing into the attic. now they won't come within a 100 yards. like I said Priceless.
A magazine
Put the ammuniton into the magazine and put the magazine into the rifle, cock it and pull the trigger..
No they won't fit. If you force it, it will ruin the rifle.
Ask a gunsmith.
Which model are you asking about. They are all different.