You can download the manual for the Old Army cap & ball revolver that has loading and cleaning instructions from the Ruger website (see related links) under the customer service heading.
load data
For a 44 cal pistol (not revolver) between 20 and 30 grains of 3F black powder or black powder substitute (like pyrodex or goex pinical) should do the trick. You will have to adjust the load to do what you want and to shoot the distance you want, but that should get you started. The above answer is stupid. Since most black powder pistols ARE revolvers. Fill the cylinder half full or a little more, if you do not want to play around with a grain counter,waste of time.
I believe 3 grains of black powder for a start
black powder, bullet patch, projectile.
27 grs of FFF Blackpowder.
Best to start with 15 -18 grains and work up from there to get the most accurate load. I shoot 27 - 30 in most of mine, and that works well out to about 50 yards.
This isn't exactly a question...so there is no way to answer it without know what you are asking about a black powder hand gun. Yes they exist, a flint lock pistol is an example of one, and they are very fun to shoot.
Pull the slide back, and lock it to the rear. Inspect the chamber to ensure it's clear. Check the safety to ensure it's on safe. Load rounds into the magazine. Insert magazine into bottom of pistol grip. Release slide to chamber the first round.
Follow manufacturer provided instructions.
Need more of a description. Are you talking about a Black Powder revolver? Is it an original or reproduction? Depending on what you have and the condition it is in it could be worth as little as 100 or tens of thousands of USD Need more of a description. Are you talking about a Black Powder revolver? Is it an original or reproduction? Depending on what you have and the condition it is in it could be worth as little as 100 or tens of thousands of USD
how to breakdown and load 38 caliber iver johnson pistol?
If the Ruger website will load for you, it has extensive sn data