To reassemble a RG10 .22 pistol, start by ensuring the pistol is unloaded and the magazine is removed. Insert the barrel into the frame, aligning the locking lugs properly. Next, slide the slide into place, ensuring it locks onto the frame. Finally, reinsert the recoil spring and guide rod, ensuring everything is properly aligned before testing the function of the mechanism. Always refer to the manufacturer's manual for specific guidance and safety checks.
Check YouTube for Marksman Repeater, I have found several that show you how to take it apart and put it back together
Follow instructions in the owner's manual. Find a gunsmith.
I would contact Daisy directly and ask them See the link below
See the attached Link: https://www.youtube.com/watch?v=H5qbEgnSZF0
You will need a gunsmith to show you.
don't put it back together ! for the sake off your 2 year old .
Try your local gun smith.
Which spring?? Which pistol??
Get two pistols and put them together and it will make a double pistol! TADA!
Most are not made to be taken apart to begin with.
how do you put a .38 special back together
It depends on the pistol, but VERY generally speaking, you clear the gun, take the slide off (the slide removal process depends on what type of pistol), take the guide rod out, take the barrel out, then put cleaning solvent on the parts, let it sit for a little bit, wipe the solvent off, put on a very thin coat of lubricant on most of the metal parts, then put the gun back together.