it actlly all depends on which head you have...but regardless always roll spool putting the line on it, don't roll the line, but the spool, keeps the line able to come off when bumping, if you wind the line around the spool it will normally melt and prevent it from feeding.
The best type of string to use for a Kobalt weed eater is a high-quality, durable trimmer line that is compatible with the specific model of the weed eater.
To replace the string on a weed eater, first, turn off the weed eater and disconnect the spark plug. Then, remove the spool housing and take out the old string. Cut a new piece of string to the appropriate length and thread it through the spool. Wind the string in the direction indicated on the spool and secure the ends. Finally, reassemble the spool housing and reconnect the spark plug before using the weed eater again.
To perform a Ryobi weed eater string replacement, first turn off the weed eater and disconnect the spark plug. Then, remove the spool cover and take out the old string spool. Cut a new piece of string to the appropriate length and thread it through the spool. Wind the string in the direction indicated on the spool and secure the ends. Finally, replace the spool back into the weed eater and reattach the spool cover.
The amount of weed eater string you need for yard maintenance depends on the size of your yard and how often you use the weed eater. It's a good idea to have at least one extra spool of string on hand so you don't run out in the middle of a job.
This answer may sound wierd but trust me: THIS WILL WORK - it's worked for me for 10 years, and it'll work for you for 10 years * first you need to clean out the entire weed eater * then take a 50 5ft piece of floss and string it around both of the pipes * rub the bottom of the weed eater with toothpaste and your weed eaer should hold up twice as long as it was supposed to! (only works if you do these steps for two weeks everyday in the beggining)
re string a bolens bl110
0.080" per 1993 manual
Yes, the size of the weed eater string does matter for its effectiveness and performance. Thicker strings are generally more durable and can handle tougher vegetation, while thinner strings are better for lighter tasks. The size of the string can impact how quickly and efficiently the weed eater can cut through grass and weeds.
To change the string on a Skill weed eater, first, ensure the tool is turned off and unplugged or that the battery is removed for safety. Next, locate the spool on the head of the weed eater, press the tabs or release button to remove it, and pull out any old string. Cut a new length of string according to the manufacturer's specifications, thread it through the spool, and wind it tightly before reattaching the spool to the weed eater. Finally, make sure the string is properly fed through the eyelets before use.
Your Ryobi weed eater string may not be coming out due to a tangled or jammed string, a worn-out spool, or a faulty trimmer head. To fix it, try removing the spool and untangling the string, replacing the spool if necessary, or checking and replacing the trimmer head if it's damaged.
To remove the head of a Ryobi Expand-It weed eater, you typically need to unscrew the bump knob or cap on the head of the trimmer. Once the knob is removed, you can access the spool and remove it from the head. This allows you to detach the head from the weed eater for maintenance or replacement.
It's tangled on the spool. You need to open & rewind around it.