To remove the stock from a Winchester 30-06 rifle, first ensure the firearm is unloaded and safe. Use a screwdriver to remove the screws located at the rear of the trigger guard and any additional screws securing the stock to the receiver. Carefully pull the stock away from the receiver, ensuring not to damage any components. If needed, consult the specific model's manual for detailed instructions.
Leave this to a gunsmith
remove the buttplate screws, and the buttplate. In the large round hole in the stock is the stock bolt. That is unscrewed to remove the stock from the rifle.
1958 model 70 Winchester 3006 good condition
Best left to a gun smith.
Best left to a gunsmith
Remove the stock and you will see what is keeping the bolt from sliding out.
over 3 thousand
Simple as Pie. (or PI). Remove the buttplate screws and buttplate. Unscrew the buttstock Bolt, all the way, with a LONG screwdriver, remove the bolt and slide off the stock.
First you must remove the buttpad, or buttplate that you have on the stock. You will reveal the hole that the bolt goes into. You will need either a long screw driver or a extension attachment for a ratchet wrench in order to take the bolt out and the stock off.
what is value of 1972 winchester 3006 springfield? It will range between 275-450 dollars,depending on overall condition.
codey
Winchester hld - red