Make sure the shotgun is empty. Look in the chamber and the magazine tube. Pull the slide back and remove the end-cap and then the barrel needs to come off forward and out of the receiver. Slide the forearm forward and reach a finger into the right front side of the receiver. You will feel the right side cartridge guide. Push that up against the right side of the receiver wall while sliding the forearm forward and the forearm will come out of the receiver along with the bolt. Assembly is in reverse order.
first cock the pump down then unscrew the magazine cap then the barrel should slide out
NO
Remington does not show a 870 rifle on their web site. Do you mean the 870 Shotgun? the Remington 870 is one of the most popular shotguns in the us. this shotgun ranges from $300 for the basic model to $1000 for the fancy Wingmaster edition
No
Remove the cap from the end of the tube and be careful of the spring which is under pressure. The plug will come out with the cap.
Serial numbers by year for the 870 Remington Model.
Yes.
The year of a Remington 870 can be determined by its serial number, which is typically located on the receiver. Remington has produced the 870 shotgun since its introduction in 1950, and various models have been made over the years. To find the specific year of a particular Remington 870, you can refer to Remington's serial number lookup chart or contact the manufacturer for assistance.
All Remington model 870 shotguns were made in the Unites states.The Remington plant was located in Ilion,New York.
The W ahead of the serial number indicates that your Remington 870 wingmaster was made in 1972.
The 870 Remington shotgun used to be a popular candidate for a "release" trigger.
Remington 870 pumps max out at $250