To replace the bolt on a Winchester Model 59, first ensure the firearm is unloaded and pointed in a safe direction. Remove the stock by unscrewing the screws that attach it to the receiver. Then, remove the bolt by pulling the bolt handle back and sliding it out of the receiver. To install the new bolt, simply reverse the process, ensuring everything is aligned correctly and securely fastened.
Winchester made numerous bolt action 22 rifles.
Open the bolt, hold the trigger back, pull the bolt out
Numrich Gun Parts Corp would be your best bet in finding a bolt for your Winchester rifle.
To replace the extractor on a Winchester Ranger Model 1400, first ensure the firearm is unloaded and the action is open. Remove the trigger group by unscrewing the retaining screws, then take out the bolt assembly. The extractor is typically located on the bolt itself; carefully remove the old extractor using a small punch or screwdriver, then install the new extractor in its place. Reassemble the bolt and trigger group, ensuring everything is properly aligned and secured.
This bolt is the same one used in the Winchester model 57, 69 and 75 rifles.
This requires the services of a gunsmith.
To replace the firing pin on a Model 70 Winchester rifle, first ensure the firearm is unloaded and safe. Disassemble the bolt by removing the bolt handle and the rear cap. Extract the firing pin from the bolt body, replacing it with a new one, and then reassemble the bolt in the reverse order. Always refer to the manufacturer's instructions or a gunsmith if you're unsure about the process.
A model 1904 is a single shot bolt action rifle.
Try e-gunparts.com
Winchester did not produce a Model 81 bolt action. Exactly how is your rifle marked? sales@countrygunsmith.net
The Winchester model 70 is a bolt action sporting rifle. In 1936 Winchester introduced the bolt action rifle to the American Market. The model 70 was largely based on the Model 54.
Pull the trigger all the way to the rear, and then insert the bolt.