Need make & model of .25 Auto.
Replace - yes if you can find one Repair - don't bother.
How to replace a firing pin from a Charles Daly 20-gauge semi automatic
See a gunsmith
The Ted Williams model 100 was a Winchester model 1894 rifle.Use this model to order a new firing pin.
Best left to a gunsmith
Best left to a gunsmith
There were two types of firing pin used on that model. Would need to see the bolt, but we have the pin. gunshop@nctv.com
Best left to a gun smith.
www.leesgunparts.com I have new firing pins for that model. sales@countrygunsmith.net
To remove the firing pin from a Winchester Model 100, first ensure the firearm is unloaded and safe to handle. Disassemble the rifle by removing the stock and bolt assembly. Once the bolt is accessible, locate the firing pin retaining pin or screw, remove it, and gently slide out the firing pin from the bolt assembly. Reassemble the rifle by reversing the disassembly steps.
There is usually a screw on the top of the receiver in front of the hammer or a pin through the side of the receiver holding the firing pin in.