http://www.surplusrifle.com/03a3/operations.asp
take bolt off
The Remington model 700 bolt handle is part of the bolt body and this is a one piece forging.The only way to remove the bolt handle is to cut it off at the bolt body.
The Remington model 700 bolt handle is part of the bolt body and this is a one piece forging.The only way to remove the bolt handle is to cut it off at the bolt body.
Request a manual from Remington's web site.
Best left to a gunsmith
Best left to a factory trained gunsmith
First take off the stock. Second pull down on the bolt stop pin located in front of the trigger. Third while holding down on the bolt oin remove the bolt.
take out the scew on the bottom side of the barrel
Borrow a bolt from someone who has one and take to a gunsmith/machinist
To remove the bolt from a Cooey Model 600 .22 caliber rifle, first ensure the rifle is unloaded. Then, locate the bolt release lever, usually found on the left side of the receiver. Pull the lever down while simultaneously pulling the bolt slightly rearward until it disengages. Finally, you can slide the bolt out of the receiver completely.
Open the bolt, check that gun is empty. Release safety, press and HOLD trigger, side bolt out. If that does not work, look for a screw on the left side of the receiver near the bolt. Remove screw, then repeat first steps.
you take a bolt and bolt it.