0
What else can I help you with?
How do you thread an twist n edge weed eater model ret115?
To thread a Twist N Edge Weed Eater model RET115, first, unplug the unit for safety. Remove the spool by pressing the tabs on the spool cover and lifting it off. Take a new spool of line, insert the line into the designated hole, and wind it around the spool in the direction indicated by the arrows, ensuring it's tightly wound. Finally, reinsert the spool into the head, making sure the line is threaded through the eyelets, and replace the spool cover securely.
What is Name the parts of a twist drill?
The parts of a twist drill include the shank, neck, flutes, land, body clearance, and cutting edge. The cutting edge is the point of the drill bit and does the actual cutting.
Who lost their WWE championship to edge in a triple thread match on July 3 2009?
Edge was not even in Wwe at that time, he was injured.
Why are scissors used in a sewing machine?
Scissors aren't actually used IN a sewing machine. Scissors are used to cut the fabric, thread, notions, etc. that one might use to sew. There is a blade on a serger machine that cuts off the raw edge of fabric, while encasing the edge in thread.
How can I achieve a professional finish on my sewing project using a blind hem stitch by hand?
To achieve a professional finish on your sewing project using a blind hem stitch by hand, follow these steps: Fold the fabric edge to create a small hem. Thread a needle with matching thread and knot the end. Insert the needle into the folded edge of the fabric, catching only a few threads of the main fabric. Bring the needle back out and make a small stitch on the folded edge. Repeat this process, keeping the stitches small and even. When finished, secure the thread with a knot and trim any excess thread.
When you have hand wind the elastic on the machine and have everything in place but the material don't gather what do you do?
Using elastic thread in the bobbin doesn't make the material gather, you have to do it yourself. This is called shirring. You'll need to use a zigzag stich, make several rows of stitching, secure the top thread and the elastic thread on one edge of the fabric and then pull the elastic threads on the other edge to produce the gathering or shirring.
How can I sew the edge of fabric?
To sew the edge of fabric, you can use a sewing machine or hand sew with a needle and thread. Start by folding the edge of the fabric over to create a clean edge, then stitch along the folded edge using a straight stitch or a zigzag stitch to secure it in place. Trim any excess fabric if needed.
How do you perform a field hockey tomahawk?
A tomahawk is a hit where the edge of the stick is used to strike the ball. Simply swing as you normally would, but twist your wrists slightly so that the edge is used instead.
Why is it important to serge or zigzag over the edge of a fabric that is loosely woven or unravels easily?
Serging or zigzag stitching a fabric keeps the fabric from unraveling.Serging trims the loose threads and encloses the edge in a thread casing.If a serger is not available, zigzag stitching the edge will enforce the fabric edge and keep it from unraveling.
How can I achieve a professional finish on my garment by hand sewing an invisible stitch hem?
To achieve a professional finish on your garment by hand sewing an invisible stitch hem, follow these steps: Fold the fabric edge twice to create a narrow hem. Thread a needle with matching thread and knot the end. Insert the needle into the folded edge of the fabric to hide the knot. Take small, even stitches along the folded edge, making sure to catch only a few threads of the garment fabric. Pull the thread tight to create an invisible stitch. Continue stitching along the entire hem, making sure the stitches are evenly spaced and secure. Knot the thread securely at the end of the hem to finish.
How many faces a hexagonal nut have?
It have six (as in hexagonal) around the edge, a top and bottom face and the hole in the middle with the thread. So it have 8 faces.
What shears have a zigzag edge and are used to trim raw edges of fabrics?
Because of the way that fabric is woven out of thread, it can easily come apart into its constituent threads at the edge of the fabric. The zigzag shape of an edge makes it slightly harder for the fabric to come apart. The shears are called "Pinking Shears"
