Various weights are made. You must specify which weapon you are looking at.
@ 750 g
No one. A standard .45 ACP bullet is about 230 grains. A .45 caliber bullet that only weighed 50 grains would merely be a very thin disk of lead.
A typical .50 caliber round, such as the .50 BMG (Browning Machine Gun) cartridge, has an approximate mass of around 45-52 grams, depending on the specific type and composition of the bullet and casing.
what type bullet in 50 cal
Any bullet that has a diameter of one half inch is a .50 caliber bullet. There are different .50 caliber bullets- my Hawken muzzle loading rifle shoots a .50 caliber lead bullet, but different from the .50 Browning Machine Gun (that is also used in the .50 Barret sniper rifle)
They are most certainly measured differently. The "50" in 50 caliber is measuring in inches and should actually be referred in writing as ".50 Caliber." The "5.56" is in millimeters (mm) and should be written as "5.56mm".To compare the two:.50 Caliber = 1/2 inch = 12.7mm5.56mm = ~ .2189 inchSo the .50 caliber bullet is roughly 2.28 times wider than the 5.56mm caliber bullet.
If you shot a 50 caliber bullet at a 7.62mm bullet and they hit dead on, you prbly wouldn't even know the 7.62mm bullet exsisted because the 50 caliber bullet would sh!t f*ck the 7.62mm bullet , short answer- 50 cal. Look up a ammo size comparison chart
The highest caliber bullet commonly used is a .50 cal. However, there are bullet that are larger in caliber. the 700 Nitro express comes to mind.
Size and relative power. A .40 caliber bullet is .40 of an inch and the entire cartridge is 28.8 millimeters long. A .50 caliber (handgun) bullet is .50 of an inch and the entire cartridge is 40.99 millimeters long. The .50 caliber has more powder, more velocity, and more muzzle energy.
A .50 caliber bullet is measured by its diameter, which is half an inch (or approximately 12.7 millimeters). Measurement can be done using specialized calipers or micrometers. The caliber of a bullet refers to the diameter of the projectile it can fire.
Caliber is in reference to the diameter of the bullet. A .40 (which is what I have) is .40 inches in diameter. A .50 caliber is .50 inches in diameter (half an inch). So a caliber is the inches in diameter. Not including the 9mm which I cannot stand
no