0
What else can I help you with?
What is the twist rate for a ruger m77 1976 243?
1/10
What is the twist rate for a 1976 ruger m77 243 rifle?
1/10
What is the rate of twist for a Ruger MK II 30-06?
IIRC, 1 in 10
What is the twist rate of a ruger M-77 in 22-250 cal.?
1 in 14"
What is barrel twist in a ruger m77 mark II in 30-06?
1/10 IIRC
What is the barrel twist rate for a ruger model 77 chambered in 22-250?
If it's an older gun it's likely 1:14 twist. Most of them were.
What is the twist rate for a Ruger Model No. 1 in 243 cal?
The Ruger Model No. 1 in .243 caliber typically has a twist rate of 1:10 inches. This means the rifling makes one complete turn every 10 inches of barrel length. This twist rate is designed to stabilize the common bullet weights used in .243 caliber, optimizing accuracy and performance. Always check the manufacturer's specifications for confirmation, as variations may exist.
What is the twist of a mini-14 ranch rifle?
According to Rugers web site the twist on a Ruger Mini 14 Ranch is 1:9' RH. But I believe that changed from 1:10 to 1:9 in the mid 1980's.
What is barrel length and rifle twist on a Ruger M77- Mark 2 Rem 260 with serial number 792-11418?
You can measure the barrel yourself if you have it, using a steel tape measure. You can also contact Ruger Customer Service through the Ruger website. There is no published data that gives the barrel length of each firearm made by a given company, only the standard configuration for a given model- and THAT varies.
What company makes a .223 rem barrel with a 1in7 twist?
Ruger did for a time have min-14's in 1:7 twist...no longer. But they made enough of them, that they're "findable". The serial numbers are approximately: run start: 1989: 185-56000 or for the Ranch Rifle: 187-84000 run finish: 1994: 186-35000 or for the Ranch Rifle: 188-75000
Who is the most interesting character of Oliver Twist?
Oliver Twist.
Which twist is stronger the z-twist or s-twist?
S and Z twist are two types of twist given to yarn. Before giving twist fibre /roving strand has to be parallel so that either twist given is not affected. Either of twist is suitable but in practical applications Z twist is given to yarns either be knitting or weaving.
