0
What else can I help you with?
What is a 209 primer?
Well......... As far as I know, a 209 primer isn't a paint primer at all. It is an ignition source for the powder in a bullet. There are a few different types, 209 being one of the most common. They're most commonly used in shotgun shells, and black powder rifles.
Primer size for 50 cal black powder?
Depending on manufacturer and model of gun it would be a 209 shotgun primer for inline guns or a #11 for sidelock guns.
Is there a 209 primer conversion kit available for the 870?
By 870 I assume you mean the Model 870 shotgun? If so, there would be no purpose for that type of conversion. Shotshell primers are of the 209 size. The 209 "conversion" is done with muzzle loaders. The idea is to replace the muzzle loader nipple (that holds the cap) with a conversion unit that uses the 209 shotshell primer to get more positive ignition of the black powder.
Is there a difference between a muzzleloader 209 primer an a shotgun primer?
A 209 is a 209 regardless of what it is used for.
What is the maximum amount of black powder for a 50 cal wolf magnum?
The Wolf Magnum is rated for 150 grains maximum charge and designed for use with Pyrodex pellets or similar pellet type powder and 209 shotgun primer ignition.
Where can you find a small rifleprimer nipple for a hammer type muzzle loader?
Rifle primers are generally not reccommended for muzzle loading firearms- the flame is not large enough to reliably ignite black powder or Pyrodex. There are nipples that use a #209 shotgun primer, and even then, it is reccommended that you use a primer intended for black powder. Check with Dixie Gun works for a nipple that will fit your rifle.
Are Federal 209 primer are the same as Federal 209A primers?
Federal 209A primers are hotter than Federal 209 primers and are hotter than Winchester or Remmington or CCI 209 primers. To duplicate your load when substituting Federal 209A primers in place of any other 209 primer, use 1 grain less powder for like performance.
Loaded black powder gun in car Wisconsin?
Most areas will allow a loaded muzzle loader in a vehicle so long as it is unprimed, (no powder in the pan, percussion cap or 209 primer) though not a safe idea, and you should always check with the local jurisdiction to be sure.
Are there Black powder revolvers with 209 primers?
no, revolvers all use either a No. 10 or 11 percussion cap
What kind of guns do not use a 209 primer?
Among muzzle loaders, caplocks and flintlocks do not use 209 primers.
Can you change blackpowder to 209 primers?
If this question is asking if 209 shotgun primers can be used to ignite blackpowder, the answer is yes. That presupposes that the firearm is designed to do so. There are some inline rifle muzzleloders that are so designed. If the question is asking if a muzzleloder can be modified to use a 209 primer I don't know if I would even consider doing that unless that gun was of the inline design, even then the cost would probably make it not worth the effort. you would probably have a hard time finding a gunsmith willing to tackle the job.
How do you install 209 remington primer kit?
To install a 209 Remington primer kit, first ensure that your reloading press is compatible with the kit. Begin by removing the existing primer system from your press, if applicable. Then, follow the manufacturer's instructions to securely attach the 209 primer kit to the press, ensuring it is properly aligned and tightened. Finally, load the primers into the primer tray and test the mechanism to ensure smooth operation before reloading.
