0
There are several reasons your Troy-Bilt weed eater might not start. Common issues include a clogged fuel line or filter, stale fuel, a faulty spark plug, or a dirty air filter. Check these components, and ensure the fuel is fresh and mixed correctly if you’re using a two-stroke engine. If these don't resolve the problem, it may require professional servicing.
What else can I help you with?
Oil for 4 cycle weed eater troy bilt?
Briggs and Sratton 30W oil available at Lowes or Home Depot.
Why is your troy bilt weed eater hard to start?
A Troy-Bilt weed eater may be hard to start due to several common issues, such as a clogged fuel filter, stale fuel, or a dirty air filter. Additionally, problems with the spark plug or fuel lines can hinder ignition. Ensuring proper maintenance, including regular cleaning and using fresh fuel, can help resolve these starting difficulties. If the problem persists, it may require professional servicing.
Where are troy-bilt weed eaters made?
usa
What is a compatible spark plug for 794 00082 in Troy bilt weed eater?
A compatible spark plug for the Troy-Bilt weed eater model with part number 794-00082 is the Champion RCJ-8Y. This spark plug is commonly used in many small engine applications and is known for its reliability and performance. Always ensure to check your owner's manual for specific recommendations and proper installation.
Why does your troy bilt weed eater only start with starter fluid?
check the muffler. usually there is a fine screen somewhere inside it to catch occasional sparks and this screen gets plugged with carbon and will not let the engine breath.
Who makes troy bilt weed eaters?
Troy-Bilt weed eaters are manufactured by Troy-Bilt LLC, a brand that specializes in outdoor power equipment. The company was founded in 1937 and is now a subsidiary of MTD Products Inc., which produces a variety of outdoor tools and equipment. Troy-Bilt is known for its commitment to quality and innovation in lawn and garden care products.
How do you remove head from troy bilt tb20cs weed eater?
To remove the head from a Troy-Bilt TB20CS weed eater, first ensure the engine is off and the spark plug is disconnected for safety. Hold the head firmly and rotate it counterclockwise to unscrew it from the shaft. If it’s stuck, you may need to use a pair of pliers to grip the head while turning. Once loose, simply pull the head straight off the shaft.
How do you change oil on a 4 stroke troy bilt weed eater?
To change the oil on a 4-stroke Troy-Bilt weed eater, first ensure the engine is cool and then place the unit on a flat surface. Remove the oil fill cap and drain the old oil by tipping the weed eater slightly to allow the oil to flow out into a suitable container. Once drained, refill with fresh oil through the oil fill opening, using the recommended oil type as specified in the owner's manual. Replace the oil cap securely, and check the oil level to ensure it is within the recommended range.
How do you remove spool on troy built weed eater?
To remove the spool from a Troy-Bilt weed eater, first, ensure the machine is turned off and unplugged (if applicable). Press the tabs on opposite sides of the spool to release it from the head. Once the tabs are pressed, gently pull the spool out of the trimmer head. If necessary, consult the user manual for specific instructions related to your model.
What is the coil gap for a troybilt tb70ss weed eater?
The coil gap for a Troy-Bilt TB70SS weed eater is typically set at 0.010 to 0.012 inches. It's important to ensure the gap is adjusted correctly to optimize engine performance and starting. Always refer to the owner's manual for specific guidelines related to your model, as there can be slight variations.
How much oil does a tbp6040 xp troy built weed eater use?
none
How do check the oil in a troy built weed eater?
To check the oil in a Troy-Bilt weed eater, first ensure the engine is turned off and cool. Locate the oil fill cap, usually on the side of the engine, and remove it. Use a dipstick or wipe a clean cloth around the inside to check the oil level; it should be between the minimum and maximum marks. If the oil is low, add the appropriate type of oil until it reaches the correct level before replacing the cap.
