0
"http://wiki.answers.com/Q/Need_model_and_change_number_date_of_manufacture_current_value_for_Smith_Wesson_double_action_6_shot_hand_ejector_revolver_labeled_32_WINCHESTER_C_T_G_6_in_barrel_SN_1198_Meets_NRA_A_F_C_S_for_FINE" Looks like you have a First Model, serial number range 1 - 5311, in the .32 Winchester CTG. of .32-20. "The Standard Catalog of Smith & Wesson" shows a value of 450.00 to 600.00 in fine condition. .32-20 Hand Ejector First Model
What else can I help you with?
How do you unload a revolver?
If it's a modern revolver, you activate the cylinder release, open the cylinder, and push the ejector rod.
What different types of ammunition can be used in a Smith and Wesson 32 caliber military and police model 1905 hand ejector 2nd change revolver on the barrel is stamped 32 Winchester ctg?
32-20. Does not interchange with other .32s. Good cartridge, good revolver.
How do you remove ejector rod from housing on HR 660 revolver?
Best left to a gunsmith
How do you replace the ejector assembly on a Winchester model 37?
Best left to a gunsmith.
How do you remove and install ejector on Winchester 1892?
To remove the ejector on a Winchester 1892, first ensure the firearm is unloaded and safe. Disassemble the action by removing the side plate screws and gently lifting the side plate off. Locate the ejector, which is typically held in place by a pin or screw, and carefully remove it. To install a new or cleaned ejector, simply reverse the process, ensuring that it is properly aligned and secured.
What is the lug on a revolver?
A bit of metal on the underside of the barrel. The ejector rod snaps into the lug when the action is closed.
How to install the ejector spring on a Winchester model 120 ranger 12 gauge?
Search on youtube for Winchester 1300 assembly, they are internally the same.
What is the lug on a revolver gun?
A bit of metal on the underside of the barrel. The ejector rod snaps into the lug when the action is closed.
How old is a smith and wesson hand ejector revolver serial number 394167?
You must call S&W to find out.
What is the lifter do in a revolver?
In a revolver, the lifter, also known as the ejector star or ejector rod, plays a crucial role in the functioning of the firearm. When the cylinder is swung out for reloading, the lifter helps to eject spent cartridges from the cylinder's chambers. It does this by pushing against the cartridges as they are extracted, allowing for a smooth and efficient reloading process. Overall, the lifter is essential for the revolver's operation, ensuring quick and reliable cartridge removal.
How do you repair the ejector spring on a 12 gauge Winchester ranger model 120?
You need to take it to a competent gunmsith
Did rg10 have ejector rod mine does not?
The RG10 revolver, a model produced by RG Industries, typically does not feature an ejector rod. Instead, it uses a design that allows for manual extraction of cartridges. If your RG10 lacks an ejector rod, it is likely consistent with its standard design, as many RG revolvers were known for their simplicity and cost-effectiveness in manufacturing.
