Couple of different answers to your question. With a FIRED bullet, grooves that spiral around the bullet are ballistic markings- lines engraved by the rifling in the barrel. In the case of grooves that run around the bullet, and filled with a waxy substance, those are grease grooves that hold lubricant. A single groove with no filler is a cannelure- spot for the cartridge case to be crimped into to hold a bullet snugly before firing.
the bullet rises because of the rifling in the grooves of the barrel
There are spiral grooves engraved on the inside of a rilfe or pistol barrel. When a bullet is fired, it is forced into those grooves, which impart a spin to the bullet. The grooves are called rifling.
The grooves in the barrel.
Rifling will leave grooves--impression in a bullet. These grooves can indicate the manufacturer of the gun that fired that bullet, AND, if there is a suspected gun in particular, microscopic variations can be used to confirm or refute that gun's involvement to a high degree of certainty.
Barrels have lands and grooves, not ammunition.
Grooves in the barrel. That is called rifling.
The grooves (rifling) cut into the barrel.
The stripes of the lands and grooves will be on the sides of the bullet. If the bullet is "stripping" through the rifling of the gun, the striations (proper name for the rifling marks) will be smeared.
The metal ridges between the spiral grooves on the inside of a rifle barrel are called lands. They are part of the rifling, which imparts a spin to the bullet as it travels down the barrel, enhancing accuracy and stability in flight. The grooves are the recessed areas that help guide the bullet, while the lands engage the bullet, ensuring a tight fit and promoting a more consistent trajectory. Together, lands and grooves are essential for improving the performance of a firearm.
The spiral grooves in a guns barrel are known as rifling. Its what puts a spin on the bullet as it leaves the barrel for accuracy. The grooves are called..... well, grooves. The ungrooved part between grooves is called a land. So looking through the barrel of a rifled firearm, you will see the "lands and grooves" that make up the rifling.
The spiral grooves in a guns barrel are known as rifling. Its what puts a spin on the bullet as it leaves the barrel for accuracy. The grooves are called..... well, grooves. The ungrooved part between grooves is called a land. So looking through the barrel of a rifled firearm, you will see the "lands and grooves" that make up the rifling.
RIFLED firearms are those that have a method of making the bullet spin when fired. This makes for a much more accurate projectile. The oldest and most common means of doing this is buty cutting spiral grooves on the inside of the barrel. These grooves grip the bullet, causing it to spin as it passes up the barrel. The grooves are known as rifling.