Screw obviously. Why would there be a screwdriver if there aren't any screws? anything else would be considred pry bar, etc.
If it is a screw, you drill a hole first then insert the screw using a screwdriver.
To start a screw, first align the screwdriver tip with the screw head. Then apply downward pressure while turning the screwdriver clockwise to begin threading the screw into the material.
NO, a screwdriver is what turns the screw.
To choose the best screwdriver for a screw with a tapered head, look for a screwdriver that matches the size and shape of the screw head. A screwdriver with a tapered tip or a flathead screwdriver may work best for this type of screw. Make sure the screwdriver fits securely in the screw head to avoid stripping or damaging the screw.
To screw screws'!
you use the mini screwdriver that came with it and on the propeller should be a screw on top and you unscrew it and pop it of with the tool that came with the air hog and apply the new one and make sure its on tight and then screw the screw back in and then your done.
screwdriver
The function of a screwdriver is to turn a screw into or out of materials.
The 'screw' part, as in 'screw-driver'
For a crosshead screw the "Phillips" screwdriver is used .
To unscrew a small screw effectively, use a screwdriver that fits the screw head snugly. Apply steady pressure while turning the screwdriver counterclockwise. Make sure to keep the screwdriver straight to avoid stripping the screw.
To use a screwdriver effectively and safely, first choose the right type and size of screwdriver for the job. Place the screwdriver tip into the screw head and apply firm pressure while turning it clockwise to tighten or counterclockwise to loosen. Make sure to keep your hand away from the screw head to avoid injury. Use the screwdriver with controlled force to prevent slipping and damaging the screw or injuring yourself.