The 1985 Stihl 024 AV is 44.6 cc.
41.6 cc
.325 pitch
To change the spark plug on a Stihl Wood Boss 024 AV chainsaw, first ensure the chainsaw is turned off and cool. Remove the spark plug cover using a screwdriver, then use a spark plug wrench to unscrew and remove the old spark plug. Check the gap on the new spark plug, install it by hand to avoid cross-threading, and tighten it with the wrench. Finally, replace the spark plug cover securely before starting the chainsaw.
You can purchase a manual from you dealer for about $10.00
The answer is that it is an 1118 120 0601 by the Stihl parts catalog, but if you know a good Walbro dealer it is a WA-128-1 at 2/3 the price.
The manufacture manual is 50:1 ratio i am using 40:1 for beter grasing
A sculptor / wood carver who uses a chainsaw to shape logs into works of art.
To safely and effectively cut nails embedded in wood using a chainsaw chain, you should first locate the nails with a metal detector or visually inspect the wood. Then, use a grinder to grind down the nails flush with the wood surface to avoid damaging the chainsaw chain. Finally, carefully cut the wood with the chainsaw, being cautious of any remaining nails to prevent damage to the chain.
To effectively use a chainsaw for cutting wood, you will need the following tools: a chainsaw with a sharp chain, safety gear such as gloves, goggles, and ear protection, a fuel mixture for the chainsaw, a bar and chain oil for lubrication, a file for sharpening the chain, and a wrench for maintenance.
The Stihl 031AV chainsaw can typically handle a maximum bar length of 16 to 18 inches, depending on the type of wood being cut and the specific chain used. However, for optimal performance and to avoid excessive strain on the saw, it's generally recommended to stick to a 14 to 16-inch bar. Always consult the manufacturer's guidelines for specific recommendations and limitations.
An Echo Chainsaw is used for cutting wood. Usually for cutting down trees, cutting up logs for firewood and so on, but any type of wood can be cut with one.
The purpose of a chainsaw sharpener is to help easily keep the chain blade as sharp as possible. A dull chainsaw blade will require more work from user to cut though wood and had a better chance of getting stuck in the wood.