0
What is the age of a Winchester Model 1894 serial number L04590 with a nickel steel barrel and brass hammer and trigger?
The Winchester Model 1894 with a serial number starting with "L" indicates it was manufactured in the early 1920s, specifically around 1923. The nickel steel barrel and brass hammer and trigger are features that were used in various configurations of the model. Therefore, this rifle would be approximately 100 years old as of 2023. For a precise year, consulting a Winchester serial number reference guide would be advisable.
What else can I help you with?
What are the five parts of a gun?
action, barrel, trigger,sights, hammer
What are the basic parts of a handgun?
Barrel, Trigger, Trigger guard, hammer/striker, front sight, rear sight, chamber/cylinder, frame, grip.
How do you breakdown a Marlin Glenfield model 30a for cleaning?
Lay gun on its side. Right side of gun up. Remove two screws between trigger and hammer. Remove one screw on bottom of trigger housing. Trigger housing and hammer will drop out of the bottom . Remove small srew at the end of barrel where magazine is fastened to barrel Remove two screws on both sides of forearm Magazine and forearm will pull forward with spring coming out of magazine Remove stock to allow for easier hammer replacement. Replace hammer in the at rest position{ not cocked} Lay gun on its side. Right side of gun up. Remove two screws between trigger and hammer. Remove one screw on bottom of trigger housing. Trigger housing and hammer will drop out of the bottom . Remove small srew at the end of barrel where magazine is fastened to barrel Remove two screws on both sides of forearm Magazine and forearm will pull forward with spring coming out of magazine Remove stock to allow for easier hammer replacement. Replace hammer in the at rest position{ not cocked} Lay gun on its side. Right side of gun up. Remove two screws between trigger and hammer. Remove one screw on bottom of trigger housing. Trigger housing and hammer will drop out of the bottom . Remove small srew at the end of barrel where magazine is fastened to barrel Remove two screws on both sides of forearm Magazine and forearm will pull forward with spring coming out of magazine Remove stock to allow for easier hammer replacement. Replace hammer in the at rest position{ not cocked}
What are the parts of a bb gun?
Stock or Grip, Hammer, Trigger, Breech, Rail, Barrel, Sights, BB and power source.
What are the parts of a revolver?
A revolver typically consists of several main parts: the frame, cylinder, barrel, hammer, trigger, and grip. The frame serves as the main structure of the revolver, housing the internal components. The cylinder holds the ammunition and rotates to align the chamber with the barrel. The barrel is where the bullet travels through when fired, and the hammer strikes the firing pin to ignite the primer. The trigger is used to release the hammer and fire the revolver, while the grip provides a comfortable and secure hold for the shooter.
How old is your double barrel double hammer double trigger shotgun with markings it was made by Jas Parker Sons?
I have two 1878 Jas Parker & Sons double barrel shotguns.
What is the model of a 38 caliber Forehand and Wadsworth handgun octagonal 2 barrel trigger patent date of April 3 1887 on trigger across top of the body it says double lock and safety hammer?
The Bulldog
What is the value of A Model 1900 16 ga pump w hammer?
You'll need to post the model number of the gun, it will be stamped into the barrel next to the Winchester name.
Looking for a value for an old double barrel double hammer double trigger shot gun with side bar break stamped J Manton and Co?
it is 114 =[)
Where can you find a left hammer for a Steven Model 235?
Numrich Gun Parts at the related link >>>> they dont have either hammer im looking also ebay both hammers assorted springs forend barrel and trigger group
How do the mechanics of revolver pistol work?
A single-action revolver pistol is a multi-chambered handheld firearm that holds one cartridge or round in each of the cylinder's chambers. As the firing hammer is pulled back, a ratcheting mechanism rotates the cylinder to position a chamber between the hammer and the barrel. The hammer is held back by a latch in the trigger assembly. When the trigger is released, the hammer strikes the rear of the cartridge on its "primer," a tiny explosive charge. The primer ignites the powder in the cartridge and forces the projectile to travel down the barrel toward its target. As it travels down the barrel, spiral grooves cut into the barrel twist the projectile to give it a spinning motion as it leaves the barrel. This prevents the projectile from flipping end-over-end, giving it greater speed, distance and accuracy. The spent cartridge remains in the chamber. As the hammer is pulled back, the next chamber is rotated into place on the cylinder and the process is repeated. A "double-action" pistol works on the same principal, except the hammer can also be pulled back by using the trigger assembly. This allows for more rapid firing of multiple rounds.
Difference between Winchester model 37 and 37a?
The main difference is that the hammer and the thumb lever to break it open are reversed. On the 37, the hammer was rear and the thumb lever was farther forward. the 37a is reversed. the 37a also had a gold colored trigger.
