0
The question doesn't make sense. 18V is a measure of potential difference while horsepower is a measure of power.
If you find out the current, then you can calculate the power and compare the two quantities.
Power (in watts) = Voltage (in volts) * Current (in amps)
and
1 hp = 746 Watts
so
18V * current (in amps) / 746 = power in horsepower. (this assumes the 18V is DC)
What else can I help you with?
What is the equivalent of 36 amps at 12 volts at 24 volts?
36 is to 12 as 18 is to 24.
How many volts does it take to make 1 horsepower?
Volts don't make power. Watts do. Watts = (volts) x (amps) 1 horsepower = 746 watts
How many dc volts does it take to make 1 horsepower?
Volts don't make power. Watts do. Watts = (volts) x (amps) 1 horsepower = 746 watts (Doesn't matter if the source is AC, DC, or a combination of both.)
15 amp 110 volts is how many hp?
To calculate horsepower, you can use the formula: Horsepower = (Volts x Amps x Efficiency) / 746. Using 110 volts and 15 amps, and assuming 90% efficiency, the formula would be: (110 x 15 x 0.9) / 746 = 1.49 horsepower.
How do you convert horsepower to volts on semis?
You're trying to convert mechanical force to voltage, and that doesn't work the way you think it does. The voltage doesn't change on account of the truck's horsepower - that's the alternator and voltage regulator which supplies electrical current.
400 volts x 45 amps?
Multiplying 400 volts by 45 amps would give you a power output of 18000 watts, which is equivalent to 18 kilowatts (kW).
How much is 3000 watts in horsepower?
4
How do you find watts when given volts and horsepower?
1 horse power=746watt
How many amp in 10 HP?
How to convert horsepower to amps? You'd have to make an assumption about volts. If it's running at 220 volts, that would make it 34 Amps. There are 746 watts in a horsepower and Amps = Watts/Volts.
When was Volts - album - created?
Volts - album - was created on 1997-11-18.
How many break horsepower does a Honda Cr 85 have?
This bike has about 18 horsepower
How many amps should an 18-volt circular saw draw if you want it to have equal power to a corded saw?
It is not possible to answer the question with any specificity because of a lack of info, but perhaps the following will get you on the right track. Electric motors -- on pool filters, vacuum cleaners, drills, saws, whatever -- can be rated in either amps (A) or horsepower (hp) or watts (W). While horsepower and watts are units of power, an amp is not. But if you know the voltage, you can calculate the power in watts, since watts are just amps times volts. If a motor is energized by 18 volts and draws 1.5 A, it's power consumption is 27 W (18 x 1.5). To convert watts to hp, just remember that one hp equals 746 watts. So if your corded saw is rated at, say, 0.25 hp, that's the equivalent of 186 W. Dividing that by 18 volts yields 10.36 A. DAMN, that's a lotta current!
