Most savage pump action shotguns mad during this time span bring from 100-200 dollars,depending on condition and a good bore.
A barrel with a full choke.
A shotgun barrel with a cylinder bore choke.
To determine the choke of a Springfield Model 67 shotgun, you can measure the constriction of the barrel at the muzzle. This is done using a choke gauge or calipers to measure the inside diameter of the barrel at the muzzle and comparing it to the diameter further back. Standard chokes include cylinder, improved cylinder, modified, improved modified, and full, each corresponding to specific constriction measurements. Additionally, you can test the patterning by firing the shotgun at a target and assessing the spread of shot to gauge the choke's effectiveness.
If you mean a choke bored barrel, it designates the amount of constriction a shotgun barrel has.
They came in various barrel lengths and choke combinations. If it is not marked on the side of the barrel, you will have to pattern the shotgun to determine the choke
The Choke of a shotgun is the amount of barrel restriction at the muzzle end which affects the shot pattern. A full choke will keep the spray pattern of the pellets closer together farther out than if the barrel was not restricted at the muzzle. If there is no restriction at the muzzle, the choke is said to be cylinder choke or cylinder bore.
They probably denote what choke the barrel has.
It is called "choke". lcj
Choke.
No. A choke tube slips into and screws to the muzzle end of the barrel. It can only decrease the inside diameter.
choke of sears model 20 12 gage plain barrel shotgun has 3 stars on barrel
Either a full choke,or extra full choke shotgun barrel.