0
The weight of 9mm rebar (also known as #3 rebar) is approximately 0.39 kg per meter (or about 0.26 pounds per foot). To calculate the total weight for a specific length, you can multiply the length in meters by 0.39 kg/m. For example, a 10-meter length of 9mm rebar would weigh around 3.9 kg.
What else can I help you with?
What is the unit weight of rebar 36mm?
Unit weight of 36mm rebar is 7.99 kg per meter
What is the weight of 5 rebar?
The weight of 5 rebar rods can vary depending on the diameter and length of the rebar. As a general estimate, a standard size #5 rebar (5/8-inch diameter) that is 20 feet long weighs around 15.41 pounds. Therefore, the weight of 5 such rebar rods would be approximately 77.05 pounds.
What is the unit weight of rebar 6mm?
0.222
What is the weight of 1M of D12 rebar?
0.88888
What is 162 in steel rebar weight calculation?
In steel rebar weight calculation, the number 162 refers to a common formula used to estimate the weight of rebar in pounds per foot. Specifically, the weight (in pounds) of a rebar can be calculated using the formula: Weight (lb/ft) = (Diameter in inches)^2 x 162. For example, a #5 rebar (which has a diameter of 0.625 inches) would weigh approximately 1.43 pounds per foot, calculated as (0.625^2) x 162.
What is the weight of rebar whose dimensions are 25MM diameter and 12meter length?
The weight of rebar can be calculated using the formula: weight = (diameter^2 * length * 0.006165) kg, where the diameter is in mm and length is in meters. Substituting the given values, the weight of the rebar would be approximately 22.98 kg.
What is the weight of 10mm rebar of 6.096 meter long?
3.77
How much does 25mm rebar weight?
3.85 Kg/m
How do you find unit weight of rebar 13 mm?
=1.041
How do you calculate rebar y16 to ton?
To convert rebar from diameter (e.g., Y16) to tons, first determine the weight per meter of the rebar. For Y16 rebar, it typically weighs about 1.58 kg per meter. Then, measure the total length of rebar in meters, multiply it by the weight per meter, and divide by 1,000 to convert kilograms to tons. For example, for 100 meters of Y16 rebar, the calculation would be (100 m * 1.58 kg/m) / 1,000 = 0.158 tons.
How much does 40mm rebar weigh per mitre?
The weight of 40mm rebar per meter is approximately 9.87 kilograms (21.76 pounds).
What is a typical unit weight pcf of rebar?
The typical unit weight of rebar is about 490 pounds per cubic foot (pcf). This value may vary slightly depending on the specific type and size of the rebar being used, but 490 pcf is a commonly used estimate.
