To determine the year of manufacture for a Remington 870 with the serial number 6653657, you would refer to Remington's serial number lookup guide. Based on the serial number format, this shotgun was likely produced in the early 1970s, specifically around 1971. However, for precise dating, consulting Remington's official records or a detailed serial number reference chart is recommended.
The year of a Remington 870 can be determined by its serial number, which is typically located on the receiver. Remington has produced the 870 shotgun since its introduction in 1950, and various models have been made over the years. To find the specific year of a particular Remington 870, you can refer to Remington's serial number lookup chart or contact the manufacturer for assistance.
Serial numbers by year for the 870 Remington Model.
They are date code stamped on the barrel on left side in front of receiver. A barrel location diagram and the date code table (month/year) is available on the Remington Society of America.
No, the re4ar receiver face on the Model 11 Remington has a different configuration. The Remington Model 11 is a semi-auto with a tube containing a bolt return spring located at the rear of the receiver. The Model 11 stock has a receptacle to accept this tube, the Model 870, being a pump action, does not have this receptacle.
Yes, The receiver pins are the same as the Remington 870, so any stock that will fit the 870 will fit the 7400
They are date code stamped on the barrel on left side in front of receiver. A barrel location diagram and the date code table (month/year) is available on the Remington Society of America.
It was in production from 1931 to 1949, when it was superseded by the Remington 870.
No. The 870 stock has a shoulder that mates inside of the receiver. The 887 has a receiver with a shoulder that mates inside of the stock when assembled. Both stocks are attached to the receiver by the same single 1/4'' 20 bolt configuration.
In 1950 Remington introduced fifteen versions of the Model 870 shotgun, in 12, 16 and 20 gauges.
Serial 718943w
They are date code stamped on the barrel on left side in front of receiver. A barrel location diagram and the date code table (month/year) is available on the Remington Society of America.
NO