0
What else can I help you with?
How do you remove the lighter in a 2004 2500 series Silverado?
try using your teeth, if that dont work a hammer and chisel should take care of it.
How can you avoid hitting your fingers when driving in a nail with a hammer?
You should practice hitting the nail very slowly but with force. You cold also try wearing gloves for the extra protection.
My 1995 Ford Fiesta doesn't start?
If you try hitting the starter with a hammer it should get it turning again..if its not that,its your battery or plugs.. Regards, Michael,
Chevy blazer 99 front door panel removal?
i think you should remove the door first then remove the door panel by hitting it with a soft hammer to release it.
How to take down bathroom tiles?
I would get a thin chisel and at an angle tap with a hammer and remove the grout from around one tile. Use a wide tipped chisel and gently work your way under the tile at all sides until it comes off.When the first tile is removed use a wide tipped chisel and put under the tiles to be removed. Tap with a hammer underneath the tiles they should come off pretty easily.( Make sure not to dig into the (sheetrock) wall with the chisel).This is what I would do. Do it at your own RISK!I just got finished doing this today but the tiles were set onto concrete. You'll have to use a lot more muscle and Definitely wear protective eyeglasses for all jobs that you are striking one object to another.
What precautions should you take if you are driving and you see animals standing near the roadway"?
If you see animals near the road while driving, slow down, be alert, and be prepared to stop to avoid hitting them.
How do you remove a front axle assembly on an Acura Vigor?
To remove the driver side cv axle: place a large flathead screwdriver between the transaxle housing and the axle. Then place a chisel behind the screwdriver. The order will be: transaxle housing, chisel, flat screwdriver, axle. Then give the chisel a hit or two with a hammer and it should pop out with ease. I'm not sure about the passenger side axle but I think you may have to take off the pillow block that is bolted to the transaxle which the cv axle sits in.
What precautions should you take when preparing food?
Wha precautions should you take when preparing food
How can I break a tile floor safely and effectively?
To break a tile floor safely and effectively, you should wear safety goggles and gloves, use a hammer and chisel to carefully break the tiles, and work in small sections to avoid injury and ensure a clean break.
When should a chisel head be replaced?
A chisel head should be replaced when it becomes dull, chipped, or damaged, making it ineffective for cutting or shaping materials. Additionally, if the chisel head has excessive wear that compromises its structural integrity or precision, it's time for a replacement. Regular maintenance and sharpening can prolong the life of a chisel, but once it no longer performs well, replacing it is essential for safety and efficiency.
What is a chisel made out of?
Handles are made of all sorts of shapes and sizes, and of many kinds of wood. The cheaper grades of file handles are made of soft wood. Chisel handles should always be made of hard wood. Apple wood is often used for firmer chisel handles. Socket chisel handles for heavy work are often made from hickory.ANS 2 -Many of my favorite wood chisels have handles made from 'easy to grip' rubberised composite materials. Most of these have the tang of the steel carried right through to the end of the grip. This enables the user to hammer if he really needs to ( on the odd occasion I do that, I always use a 'dead-blow' hammer.)
Where do you get the chisel sims 2 castaways Im so stuck and the walkthrus are no use to me. Any ideas?
What system If wii or ps2 just go to the work bench and select tools and chisel should be there If DS the chief Gives you the chisel
