If it is a Thompson Center Cougar it is meant to fire a patched round ball or mini ball style round, (conical lead bullet aka maxi hunter, buffalo bullet etc.) With the relatively slow twist of the rifling 1:48 it will fire Sabot bullets but will not be as accurate at ranges past 125 yards, Maximum powder charge should not exceed 100 grains. All in all it is the same mechanically as the Hawken .54 and I believe you can still download the manual at the Thompson Center website.
A 'muzzle loader' is any firearm (or cannon) which does not have a breech mechanism and which is 'charged' (loaded with powder and shot) from the muzzle end of the barrel.
When using a muzzle loading gun it is important to ensure that it can handle modern smokeless powder because of the greater amount of force produced by smokeless powder as opposed to using the black powder that the muzzle loader was intended for.
yes cause you use black powder for a muzzle loader but for a real gun its all in the bullet and the hammer...
velocity
Velocity
Black powder, or a black powder substitute such as Pyrodex. Smokeless powder (modern gun powder) should not be used in a traditional muzzle loading firearm.
Your question answers itself, "muzzle loader". You load it from the muzzle. Actually, that's incorrect. They use the term "muzzle loader" improperly. It's a bolt action black powder rifle. The powder is pre-pressed into slugs that you load into the chamber, along with wadding and a bullet. I would guess you could load it down the muzzle, but it's faster and easier to buy the slugs and load that way.
In the technical sense no it is not loaded via the muzzle of the gun, black powder revolver is accurate as terms go, but they do fall under the blanket of "muzzle loader" in general terms.
No published sn data known.
Knight rifles website has the manual for this gun available to download, contains complete instructions and capacities for powder etc. www.knightrifles.com
Typically a round ball .440 inches is used, together with a greased cloth patch about .015 inches in thickness. This results in a "squeeze" fit of the ball to the barrel. If you have a modern muzzle loader, we would urge you to contact the maker, and get the owner's manual for YOUR rifle- most are free, and available on line as a download. If you have an ORIGINAL muzzle loader, please do not attempt to shoot anything in it until a competent gunsmith has inspected it. And NEVER use anything but black powder (or a legitimate black powder substitute, such as Pyrodex) in a muzzleloader.
A 'muzzle loader' is any firearm (or cannon) which does not have a breech mechanism and which is 'charged' (loaded with powder and shot) from the muzzle end of the barrel.