0
What else can I help you with?
How do you adjust the trigger pull of your western field shotgun?
The only way is to replace the whole trigger but it will still have a hair trigger
Where does the spring above the trigger housing on the glen field mod 60 22 rifle hook to?
Really short coil spring with loops on both ends?
How do you remove the bolt for cleaning a spring field 30-06 rifle?
move the safety lever and hold trigger back as you remove bolt
Where is the model number on a western field 12 gauge pump?
Can be found on the left side of the weapon just above trigger housing.
Need to now how to reasimbal the trigger on ward's western field model 10-sb94-t?
To reassemble the trigger on a Ward's Western Field Model 10-SB94-T, first ensure that the firearm is completely unloaded and safe to handle. Begin by inserting the trigger mechanism back into the receiver, aligning it with the hammer and sear. Secure the trigger assembly with any necessary pins or screws, making sure everything moves smoothly. Finally, perform a function check to ensure the trigger operates correctly before using the firearm.
Where can you get a rifle stock for your wards western field model 36d or trigger guard?
You might try this link. Copy and paste it. http://www.gun-parts.com/index.html/
How do you field strip a 22 caliber Iver Johnson US carbine?
Ensure the gun is unloaded. Remove the magazine. Pull back the operating slide and visually inspect the barrel to make sure there is not a round chambered. Loosen the screw on the band on the forward end of the stock and slide the band forward. Remove the hand guard. Remove the screw just behind the trigger guard. Remove the stock. Pull back on the operating slide spring and hold it while pulling the operating slide spring guide out of trigger housing. Carefully relieve the tension on the spring, then slide the spring guide out. Remove the trigger housing retaining screw and the two trigger housing retaining pins. Lift the receiver away from the trigger housing. Remove the operating slide by sliding it forward. Lift out the recoil plate. (Careful – it is under tension from the firing pin spring). Remove the bolt and firing pin piece and slide them apart. You have now field stripped your Iver Johnson .22 cal. carbine.
Model SD14A 410 Western Field?
This is a stevens model 39A. The stevens 59A, B and C all had the takedown screw in front of the trigger guard.
Where can you find trigger guard to action screws for Wards Western Field Model EJN-750-Sako bolt action .308 rifle?
http://www.forsterproducts.com/Pages/screws_trigger.htm
Why does your trigger get stuck on your tippmann 98 custom and how do you make it stop?
There are two things that can cause this: 1. The spring that resets the trigger is worn or is otherwise malfunctioning. 2. There is dirt or paint between the trigger and the inside of the gun, gumming it up. If you know how, take apart and clean your gun thoroughly. If not, take it to a paintball field or shop and have someone show you how.
How far is it to get to pa from spring field Illinois?
You can make the western border in just over 500 miles, but the eastern border is another 280 miles away.
Who made the western field model M147?
western field is/was a mossberg company
