You can get a bolt for a Springfield Model 52A by visiting specialty gun shops. Alternatively, there are several sites online that offer this particular type of bolt.
The Springfield Model 52A was produced from the late 1940s to the early 1950s. The mark of a "14" inside a circle typically indicates that the rifle was manufactured in 1954. Therefore, if your Model 52A has this marking, it would be approximately 69 years old as of 2023.
Between 70 and 200 dollars depending on condidtion
.22 bolt action rifle, obsolete. sales@countrygunsmith.net
Numrich will have parts if anyone does. They're reliable but not the cheapest. Many gun shows have dealers who break old guns down for parts. If you google "parts, springfield model 52a" you should get a few leads if there are any.
your savage Stevens model 52a was made between 1933-1937 in the amount of 88,000 guns.
lalalalalalala
To remove the bolt from a Winchester Model 52A with a speed lock, first ensure the rifle is unloaded and pointed in a safe direction. Pull the bolt back slightly and locate the bolt release lever on the left side of the receiver; depress this lever while simultaneously pulling the bolt all the way to the rear. Once fully retracted, the bolt can be lifted out of the receiver. Be sure to check for any obstructions or dirt before reassembling.
Springfield
Depends on the model
on the 22 model 121 to remove the bolt, open the bolt, pull the trigger and slide the bolt to the rear.
The Springfield Model 84 was made by J. Stevens Arms Company, Chicopee, Mass.
Cannot be answered without you providing a serial number to your Springfield model 1903 bolt action rifle.