get a new one
Check the underneath of lawn mower for grass built up.
No the pull chord will not cause the pull cord to be tight. The coil on the lawn mower will cause the compression to be tight.
The cord on your Honda lawn mower may not pull if it is tangled, the engine is seized, or the recoil starter is broken.
The pull cord of a lawn mower is used to manually crank the engine to get it started. As the engine is quickly turned, a spark is created which begins combustion.
Try pulling out the spark plug and clearing the cylinder
You can start it by using the pull cord, just be sure the key is in the ON position.
To turn on a lawn mower, you typically need to locate the ignition switch or pull the starter cord, then push the primer bulb a few times if it has one. Finally, pull the starter cord or turn the ignition switch to start the engine.
no the pull cord could froze see if the flyweel itself moves if it doesnt then yes it is locked
There is a small cord on the mower. DO not put your stylus directly on the loop at the top of the cord. Put your stylus at the tip of the arrow pointing to the cord. You may have to pull several times before getting the lawn mower to start. Hope this helps you.
I would start with the pull cord rapped off the recoil pulley, flywheel brake if you have one jambed, oil in cylinder pull spark plug and try to pull over or it could be some thing rapped around the blade. hope this helps
It depends on if you bought a pull start mower or a power mower. The pull start mower will have a handle you have to pull hard to start it. The power mower should have a button that simply turns it on. Make sure there is gas in the pull start mower.
no