0
Assuming you have access to the hinge mechanism. This item will probably be made of cast iron, and the hinge mechanism has rusted solidly.
Care must be exercised to avoid breaking the cast iron as it is a brittle material, and some of its substance will have been consumed into making rust. Thus the cross-section of the material will already have been reduced!
One of the spray lubricants is your best chance, but remember, there is no way to recover the material that has already turned to rust. Give it a good spray, and leave for a few hours for the spray to penetrate.
Try and get a tiny bit of movement. Try some more spray.
Once you have a small movement, then further movement will abrade the rust into a powder. But realize that is what you are doing.
What else can I help you with?
What is the meaning of a chimney cap damper?
A top damper or cap damper is a metal spring door placed at the top of the chimney with a long metal chain that allows one to open and close the damper from the fire place.
Why is cold air coming in through the gas fireplace?
Your chimney damper is open
How do you open a fireplace damper?
To open a fireplace damper, locate the handle or lever usually located inside the fireplace or on the chimney. Pull or push the handle to open the damper fully, allowing for proper ventilation and airflow in the fireplace.
Why can't i open the damper in fireplace?
Put on a pair of safety glasses or goggles (you ARE going to get stuff in your face) get a good flashlight, and get a look at the damper. Most are hinged, and will swing UP the chimney. Most have a bracket and support the holds it open or closed. With the light to help you see, move the support so that it is free of the bracket, and try to swing it open (up). If it does not move, you may have foreign material in the chimney (especially if your chimney does not have a cap). If that is the case, you need the services of a chimney sweep.
Where can one purchase a chimney damper?
One can purchase a chimney damper from a variety of stores. Chimney dampers can be purchased from fireplace specialists such as Woodland Direct, or from online stores such as Amazon.
How do you know if the damper is open or closed?
On mine if you turn the nob clockwise, that openes the damper. If you trun the now counter clockwise that closes the damper. Yours may be different. Let me think. Did you have anything in your stocking this morning?
How far to open damper in fireplace?
When you use the fireplace, the damper should be open all the way. If not, you probably will not get enough updraft and your house will fill up with smoke...not a good thing. When it is not in use, the damper should be closed...otherwise you will lose a lot of heat up the chimney.
What does brick grate damper flue chimney have in common?
fireplace
How cool should a firebed be to allow closing the flue?
By flue, I believe you mean the damper in the chimney, which has the effect of closing off the flue. Close the damper any time you are not using the fireplace. Remember -heat rises -so heated air will also rise up and out the flue in the winter. In the summer it is also good to keep the flue closed because heat and humidity will activate the smelly properties of the ash and creosote in the firepalce chimney and create a bad odor in the home. In order for a damper to do its job it must seal tightly/ If your existing mechanical damper is broken, missing or in a bad state you can repair it or replace it with a chimney top damper or a chimney balloon. But, open the damper before lighting a a fire, or it will rapidly get quite smokey in the house.
What is a fireplace flue damper, and how do you open one?
There are many kinds of dampers, depending upon how old the house is and the choice by the masons. Many dampers have a hinge on the rear and a handle that can be pushed or lifted to lift the front and latch it open. Others have a lever designed to move with a knob or chain connected to the damper. Some chimneys have counter-balanced dampers on the top of the chimney that are opened by pulling and latching a chain. A "tilt and slide" damper not only opens with a handle, but also has a movable grating that can be "slid" open and shut using a knob cast into it. If you have a gas log fireplace and can not close your damper by the handle it is very possible that the damper has been disabled or welded open according to the 1991 building code that states that dampers in new gas log fireplaces must be disabled. The only type of damper that is allowable to use in a gas log fireplace is an inflatable damper. If you do not have a gas log fireplace and you cannot open or close your damper it is likely that it has corroded to the point of non-function. The chimney is a very acidy and corrosive environment any metal in it will rust and degrade rapidly over time. Lubricate the damper with a penetrating oil and try to loosen it by hand or call a chimney sweep to come and work on it.
What dose brick grate damper flue chimney have in common?
FIREPLACE
What is the difference between a fireplace flue and a fireplace damper?
The flue is the actual pipe or chimney where the damper is the mechanism that opens and closes the flue
