Calash
Calash
calash
i seriously dont know
Should be two people doing this as the hood is quite large and difficult to handle. Open hood Remove lines to nozzles Remove bolts holding it onto the hinges on either side Remove hood
The engine computer is the ignition module. It is the large black box under the hood.The engine computer is the ignition module. It is the large black box under the hood.
Raise the hood and support it in the center with a stick between the lock and radiator support. The opposite hinge will keep the hood up, for the most part. Have a folded towel or blanket to protect the fender and windshield from the rear corner of the hood. Remove the 2 nuts holding the hood to the hinge. Lift the hood corner to free the studs from the hinge, keeping control of the hood to rest it on the blanket. Now you can remove the 3 bolts holding the hinge to the body. Two bolts on the top of the hinge are accessible from the outside; the third, bottom bolt is accessed from the engine compartment. Reverse procedure to install the new hinge.
unless it is a different bottle , there was always a large Hood milk bottle on top of the milk plant in charlestown, ma.
open the hood and loo straight down and you will see a large circular thing
You need to get the windshield folded down. This means remove the top, then the front sport bar members. On each side is a bracket that holds the windshield upright. Remove screws to allow windshield to be folded down (gently) on the hood. The wiper motor is in the top of the cowl & should easily be visible. It might not be easily accessible, but it will be visible.
Open the hood, and in the closest part to the drivers seat of the inner hood, there are 2 recipients one large and one tiny, the large prolly has BRAKE FLUID written, the other one (tiny one) is the transmission fluid recipient.
It is under the hood in a large fuse block near the battery.
Use a large long blade screwdriver thru grill & turn latch, you will see the hole in the latch. No damage done.