If you're talking about an automotive thermostat and an automotive heater , then you should go with whatever temperature range thermostat the manufacturer originally specified . If you live in an unusually cold climate , you can go up a little on the thermostat heat range during the cold weather .
Smart thermostat technology can be integrated with baseboard heaters by connecting the thermostat to the heaters through a compatible system. This allows for remote control and scheduling of heating settings, leading to more efficient and convenient heating control.
Smart thermostats for baseboard heaters offer benefits such as energy savings through precise temperature control, remote access for adjusting settings, and the ability to create customized heating schedules for increased comfort and efficiency.
Line-voltage thermostats are typically used with electric baseboard heaters.
If your Nest thermostat heat is not working properly, you should first check the thermostat settings and ensure they are correct. Next, try resetting the thermostat by turning it off and on again. If the issue persists, contact Nest customer support for further assistance.
If a thermostat is not working properly, you cannot calibrate it. It must be replaced.
To reset a Nest thermostat, go to the settings menu, select "Reset," and then choose "Factory Reset." This will erase all settings and data on the thermostat, returning it to its original state.
The Honeywell EConnect RedLINK wireless thermostat control system is a good programmable Internet thermostat that will work with baseboard heaters. It allows you to control up to eight separate baseboards.
To reset a White Rodgers thermostat to its default settings, locate the reset button on the device. Press and hold the reset button for about 5 seconds until the display resets to its factory settings. This will erase any custom settings and return the thermostat to its original configuration.
Of course a water heater thermostat would be defective as water heaters / hydronic boilers would use an Aqua Stat
The Lasko heaters come with their own thermostats, which read out on the top of the units.
The wattage of electric base board heaters does not change because the thermostat is set on low. The wattage is a fixed value on the heater because of its internal resistance element. The thermostat set on low shuts off at a lower temperature than a thermostat that is set on high. It is the time interval that governs the amount of heat that the heater produces when the thermostat calls for heat. Once the room heats up to the temperature that the thermostat is set at, the heater shuts off. The thermostat is just a temperature switch.
To reset a White Rodgers thermostat, locate the reset button on the device and press it. This will restore the thermostat to its default settings.