Try 5 different types of bleach and a lot of elbow grease. It worked for me.
To remove rabbit poo stain from a carpet, start by picking up any solid waste. Then, mix a solution of warm water and mild dish soap and blot the stain, taking care not to spread it further. Finally, rinse the area with clean water and blot until the stain is removed.
You can go to the vet and get some special shampoo thet they will give to you.You put some shampoo in a sink before you put the rabbit in and you stirr till mixed in.The water should just be above the rabbits legs.Then very gentaly you wipe the urine stain and where ever the rabbit needs to be clean.Then you let the water out and rinse the sink then you put clean Walter in the sink and rinse all of the shampoo of the rabbit and do that till the rabbit has no shampoo left on him or her.Then you have to dry him or her before bed otherwise they will get a chill and that is not good.And just a warning don't se a hair dryer do dry the rabbit coz the don't like that and it will make a rabbit cold and it is another way they can get a chill. Sorry for talking and typeing so much but this is what happend to my rabbit and he is happier whan he is CLEAN and not BLWED DRIED
Resolve. cleans. EVERYTHING. (and anything). i would get resolve pet stain, that works the best. when my dog was a puppy, he had accidents ALL the time. there is barely a stain left anywhere because i always kept resolve pet stain in my house ;)
Remove as much of the poop as you can by brushing it with a dry brush. Use a good laundry stain treater ( I like Zout or Resolve spray) wash with a good detergent, rinse twice- and good luck. Some poop is fairly acid, and may attack the colors of fabric- if that has happened, the fabric will be clean, but color off. Sorry-
Yes, dog urine can stain wooden decking if left uncleaned for an extended period of time. The acidity in urine can cause discoloration and damage to the wood's surface. It is recommended to clean up any urine promptly to avoid staining.
The secret to getting a juice out of hardwood floors is to try to get to the stain before it sets into the wood. A water and vinegar mixture can be used to remove a juice stain from hardwood floors.
Yes, you can stain hardwood floors to change their color. Staining involves applying a colored liquid to the wood to alter its appearance. It is a common method used to customize the look of hardwood floors.
Depending on how deep the stains on your hardwood floors. If you have a stain that is recent, you may be able to clean the floor with hardwood strip cleaner, if not then you may have to restrip the floor.
The available stain colors for oak hardwood floors include natural, golden oak, chestnut, ebony, and mahogany.
To refinish hardwood floors DIY, start by sanding the floors to remove the old finish. Then, clean the floors thoroughly and apply a new stain or finish. Allow the floors to dry completely before applying a sealant. Finally, apply a topcoat for added protection.
To effectively refinish and stain hardwood floors, follow these steps: Sand the floors to remove old finish and smooth out imperfections. Clean the floors thoroughly to remove dust and debris. Apply a wood stain of your choice, following the manufacturer's instructions. Allow the stain to dry completely before applying a protective finish. Apply a clear polyurethane finish to protect the floors and enhance their durability. Allow the finish to dry completely before walking on the floors.
To DIY refinish hardwood floors, start by sanding the floors to remove the old finish. Then, apply a new stain or finish of your choice. Make sure to clean the floors thoroughly before applying the new finish. Allow the finish to dry completely before walking on the floors.
To refinish hardwood floors yourself, start by sanding the floors to remove the old finish. Then, apply a new stain or finish according to the manufacturer's instructions. Make sure to properly clean and prepare the floors before applying the new finish. Allow the finish to dry completely before walking on the floors.
To effectively refinish hardwood floors yourself, follow these steps: 1. Clean the floors thoroughly. 2. Sand the floors to remove old finish. 3. Apply wood stain if desired. 4. Apply a sealant or finish coat. 5. Allow the floors to dry completely before walking on them.
To effectively touch up hardwood floors, start by cleaning the surface thoroughly. Then, sand any scratches or imperfections and apply a matching stain or finish. Finally, regularly clean and maintain the floors to preserve their appearance and quality.
To stain hardwood floors for a beautiful and durable finish, follow these steps: Sand the floors to remove any existing finish and smooth out imperfections. Clean the floors thoroughly to remove any dust or debris. Apply a wood conditioner to help the stain absorb evenly. Apply the stain with a brush or rag, following the wood grain. Allow the stain to dry completely before applying a protective finish, such as polyurethane. Apply multiple coats of the protective finish for added durability. Allow the finish to cure according to the manufacturer's instructions before walking on the floors.
To refurbish hardwood floors effectively and efficiently, follow these steps: Clean the floors thoroughly to remove dirt and debris. Sand the floors to remove old finish and imperfections. Apply a new finish or stain to protect and enhance the wood. Allow the finish to dry completely before walking on the floors. Regularly maintain the floors by cleaning and reapplying finish as needed.