answersLogoWhite

0

In order to change the torque you will need to tighten the bolt on the exhaust side of the injector to fifty inch pounds. Tighten the drivers' side bolt to nine foot pounds.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

Need torque specs on early 3126 huei with crab type injector hold down bolt and jumper tubes?

I need a specific year... preferably with engine serial number... in order to answer this. Cat never seemed content with the 3126, and always had to change something on it.


How do you remove a injector pump from a opel or vauxhall frontera?

u need a torque rench with your injector torque settings, they are on the side of the head built in in the 2.5 tds isuzu engine


Which industry uses conduit clamps?

Conduit clamps are used for jobs in which one deals primarily with pipes. A plumber, for example might have a need for conduit clamps, or a construction worker who is building a hose. Home Depot always has a large selection of conduit clamps available.


VT1100C2 Torque for spring clutch?

I need the torque urgently.


What size exhaust clamps do you need for 1998 Z24?

2 inch


How many pounds of pressure you need to torque 3.4 heads?

You need six pounds of pressure to torque.


Why my ingector 4 dont work on a 2.4 cavalier 1997?

If you mean the fuel injector for the #4 cylinder isn't working the answer is simple, either the injector is bad and needs replaced, or the connector has gone bad/ the wires are shorted out. Put an injector pulse tester on that injector (most people don't have these so you'll need to get it tested at a garage), if the injector doesn't fire when it's tested separatly you need an injector. If it does fire that means the plug/wire is the problem.


What are the different types of MTB seat post clamps available in the market and how do they differ in terms of design and functionality?

There are mainly two types of MTB seat post clamps available in the market: quick-release clamps and bolt-on clamps. Quick-release clamps allow for easy and quick adjustment of the seat height without the need for tools, while bolt-on clamps require tools for adjustment but provide a more secure and stable hold. Quick-release clamps are convenient for on-the-go adjustments, while bolt-on clamps are preferred for riders who prioritize stability and security.


What happens when you pour fuel injector cleaner into the throttle body injection?

Pouring the injector cleaner down the throttle body won't clean the injectors. You need to add the injector cleaner to the fuel tank for it to help you. Read the instructions on the container of injector cleaner.


Cadillac deville fuel diagram i need to know what the part that clips to the motor on the fuel injector on top it hold the injector in place.?

the part attached to the top of the fuel injector is called the fuel rail


How do you remove a fuel injector and clean it on a '92 Nissan pickup?

You;ll need an injector removal socket from Kent Moore or a Snap-on dealer.


What is the torque for a Nissan Altima '93?

yo need the torque for the tires. its 75