A periodic signal with a bandwidth of 70khz and highest frequency 200khz all frequencies have amplitude of 110v draw the spectrum in frequency domain utilizing Microsoft Excel charting facility? Answer this question…
Amplitude and frequency
Amplitude and frequency
The bandwidth of a signal is the width of frequencies between the highest and the lowest frequency. So 500Hz - 50Hz = 450Hz bandwidth. AE7HD
a channel is actually a path through which a signal of a particular frequency travels and bandwidth is the capacity of that path it tells about the number or range of frequencies which a path can carry
1.Amplitude 2.bandwidth 3.Noise 4.Frequency
LPF is a low pass LTI filter which passes the low frequency signals and reduce the amplitude of the signals with frequencies higher than the cutoff frequency. HPF is high pass LTI filter which passes the high frequencies and reduce the amplitude of the frequencies lower than filter's cutoff frequency.
The bandwidth of impulse signal is infinity.because upper frequency is infinity.
A beat frequency.
You can't do this unless you know more detail on the frequency modulator, like its modulation index, for example or the frequency deviation. For the amplitude modulator, it is easy. Bandwidth is twice the signal frequency so in this case the bandwidth is 178kHz for AM.
Sounds differ by amplitude, frequency and number of frequencies contained in a sound.
There's no dependence or connection between a wave's amplitude and its frequency.
AM (Amplitude Modulation) has a smaller bandwidth and can have more stations available in any frequency range. AM is cheaper and can be transmitted over long distances. FM (Frequency Modulation) signals are prone to interference due to physical obstructions. The better sound quality is due to a much higher bandwidth, using FM.